mark newman Posted December 20, 2015 Share Posted December 20, 2015 As Ryan is no more in the UK , who is the best mapper now, and is capable of mapping up to 1500 bhp , does any one know , as I need a mapper urgent well about 5 weeks , Link to comment Share on other sites More sharing options...
drift_bear Posted December 20, 2015 Share Posted December 20, 2015 Ryan still does remote mapping as far as I know, theirs also someone else from syvecs that's highly recommend after Ryan, can't remember his name though! Link to comment Share on other sites More sharing options...
mark newman Posted December 20, 2015 Author Share Posted December 20, 2015 yes he does remote , but I like it to be more hands on , also I have a 5'' exhaust from turbo all the way out , and its so loud its hard to hear Ryan on the phone as he is doing it , Link to comment Share on other sites More sharing options...
Chris Bailey Posted December 20, 2015 Share Posted December 20, 2015 Romain @ Syvecs is your best option now Ryan has gone. Heard good things about his work! Ryan put him in charge so he must know his stuff. Link to comment Share on other sites More sharing options...
tkddav3 Posted December 20, 2015 Share Posted December 20, 2015 I'll do it.... Then again Link to comment Share on other sites More sharing options...
absz Posted December 20, 2015 Share Posted December 20, 2015 Torque development International are very good and they also provide training courses for Syvecs mapping so know this ecu very well http://www.tdi-plc.com/contact-us/ Link to comment Share on other sites More sharing options...
a98pmalcolm Posted December 20, 2015 Share Posted December 20, 2015 Romain at syvecs mate. Great guy and does great work Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 21, 2015 Share Posted December 21, 2015 Dave Rowe of ex-Motec fame, now independent, Fraser MacKellar of Motec, or Sam Borgman of TDI are probably the UK's most experienced mappers. I have watched Rowe map multi million pound cars and their owners seemed calm and un-flustered.. He does not like Syvecs software though. What's the ECU? Link to comment Share on other sites More sharing options...
imi Posted December 21, 2015 Share Posted December 21, 2015 Where did Ryan go? Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 21, 2015 Share Posted December 21, 2015 UAE I think, somewhere hot where there's lots of money about Link to comment Share on other sites More sharing options...
nootysupra Posted December 21, 2015 Share Posted December 21, 2015 I knew this day would come. Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 21, 2015 Share Posted December 21, 2015 And what day is that? Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 21, 2015 Share Posted December 21, 2015 This is Dave tweaking the Motec (hidden in the original Bosch ecu casing) of a "somewhat valuable" car. He's also fearless in a passenger seat, doing live tweaking, so long as you don't act the prat. Link to comment Share on other sites More sharing options...
Ian C Posted December 22, 2015 Share Posted December 22, 2015 The name on the side of that is a CV for Dave in itself Link to comment Share on other sites More sharing options...
imi Posted December 22, 2015 Share Posted December 22, 2015 Chris Wilson said: UAE I think, somewhere hot where there's lots of money about Makes sense. Pleased for him. Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 22, 2015 Share Posted December 22, 2015 Stories that he's grown a beard, has his maps' axes in Arabic and is reading the Koran are not something I could possibly comment on Link to comment Share on other sites More sharing options...
imi Posted December 22, 2015 Share Posted December 22, 2015 Does he also have an entourage of 72 virgins following him? Link to comment Share on other sites More sharing options...
Jellybean Posted December 22, 2015 Share Posted December 22, 2015 I think Titan only do a PNP Motec for the Supra , i wounder would Dave make a patch harness ; maybe it would not be cost effective for the average person http://www.titanmotorsports.com/timomopnpfor.html Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 22, 2015 Share Posted December 22, 2015 He probably would, as would Fraser. In fact Motec UK used to sell the connector plugs and crimp connectors for the Suupra ECU I think. If I sourced the Toyota plugs I have the tooling to do them myself actually. But is there a demand? Over many years involved with Supras I have sold but two Motec ECU's to UK owners. Link to comment Share on other sites More sharing options...
Jellybean Posted December 22, 2015 Share Posted December 22, 2015 Great to know you can do it Chris, for me personally I think I would prefer to get the Motec just solely due to the availability of mappers, support , features and resale value Getting locked into a small eco system like the other manufactures is a risk and the availability of a local mapper is an issue; if I have to go the UK might as well do it right! Link to comment Share on other sites More sharing options...
Nodalmighty Posted December 22, 2015 Share Posted December 22, 2015 Link a pretty massive now world wide. The new state of the art Link Thunder systems are becoming available in the UK. Nearly all the calibration engineers I know support Link systems these days. Link to comment Share on other sites More sharing options...
JackyBoi Posted December 22, 2015 Share Posted December 22, 2015 Another vote for Romain - he's done all my mapping for me Link to comment Share on other sites More sharing options...
mark newman Posted December 23, 2015 Author Share Posted December 23, 2015 its Syvecs Chris Link to comment Share on other sites More sharing options...
mark newman Posted December 23, 2015 Author Share Posted December 23, 2015 Where does Romain work out from . Link to comment Share on other sites More sharing options...
JackyBoi Posted December 23, 2015 Share Posted December 23, 2015 mark newman said: Where does Romain work out from . All over really, I know he does a lot of work at TDI South Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now