Tomyspeedy Posted December 14, 2015 Share Posted December 14, 2015 So i've got a unique car which I require a custom exhaust to be fabricated to fit. It's a non cat system so would be a manifold back custom. Has anyone got a rough idea of the cost for making up such a custom exhaust? I'm hoping to keep it quite generic but I can give details if required. Any info would be appreciated Link to comment Share on other sites More sharing options...
skippyboyo1 Posted December 15, 2015 Share Posted December 15, 2015 for my supra i paid £350 for cat back then £500 for full system with no cats. this was a few years ago mind Link to comment Share on other sites More sharing options...
scott.wild Posted December 15, 2015 Share Posted December 15, 2015 Maybe a bit far for you but i have used http://www.mijexhaust.com/ before, for the Supra and the RRS. Link to comment Share on other sites More sharing options...
mellonman Posted December 16, 2015 Share Posted December 16, 2015 If its a 3" system loads of places do it now you are looking at around 500 though Link to comment Share on other sites More sharing options...
ripped_fear Posted December 16, 2015 Share Posted December 16, 2015 where abouts in devon are you as my old NA had a catback system from a company down that way, it looked and sounded great and had lasted many years and is now fitted on another members car. Link to comment Share on other sites More sharing options...
Tomyspeedy Posted December 16, 2015 Author Share Posted December 16, 2015 Im in North Devon but I intend on getting this project car on the road, so I can travel to get it done somwhere. Link to comment Share on other sites More sharing options...
ripped_fear Posted December 16, 2015 Share Posted December 16, 2015 Im in North Devon but I intend on getting this project car on the road, so I can travel to get it done somwhere. I cant remember where it was the previous owner had got the one made that was on it. Jonc on here was the previous owner to me, so maybe worth a pm to see if he remembers. I had the car 5 years so it must have been fitted 6+ years and like I say I sold it on to another member too. If Jon can remeber pm josesupra as he owns it now and will habe the recipt in the history. May be local to you, never know, thats if the company are still going. Link to comment Share on other sites More sharing options...
Axle Posted December 22, 2015 Share Posted December 22, 2015 If its a 3" system loads of places do it now you are looking at around 500 though I take it you have no idea on my build Try 5 inch Link to comment Share on other sites More sharing options...
TBDevelopments Posted December 23, 2015 Share Posted December 23, 2015 Ive done a few in the past, Sorry dont have anything to upload but a few examples of my fabrication on my facebook blog. http://Www.facebook.com/tbdevelopments Link to comment Share on other sites More sharing options...
Tomyspeedy Posted December 23, 2015 Author Share Posted December 23, 2015 Thanks for all the help peoples. The car isn't running as well as it could be so I feel a new exhaust and a tune/remap would be ideal. Its a Yb engine from the sierra sapphire Cosworth (sorry ford haters) but it really needs someone who knows what they're doing to have a look. Tim thanks for the offer, I won't be doing anything this winter but I'll deffintly be in touch closer to the time. It's an engine and running gear in a different shell so no off the shelf exhaust will fit. The current one has been crushed by many speed bumps, car has since been raised to a usable height. I may also be after a fuel tank and swirl pot fabricated aswell. While I'm thinking about it.... Would you be able to fabricate a couple of decats with a flexible section included? (unsure if anyone already makes these) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now