Custom exhaust fabrication

[Tomyspeedy]

So i've got a unique car which I require a custom exhaust to be fabricated to fit.

It's a non cat system so would be a manifold back custom.

 

Has anyone got a rough idea of the cost for making up such a custom exhaust?

I'm hoping to keep it quite generic but I can give details if required.

Any info would be appreciated

[skippyboyo1]

for my supra i paid £350 for cat back then £500 for full system with no cats. this was a few years ago mind

[scott.wild]

Maybe a bit far for you but i have used http://www.mijexhaust.com/ before, for the Supra and the RRS.

[mellonman]

If its a 3" system loads of places do it now you are looking at around 500 though

[ripped_fear]

where abouts in devon are you as my old NA had a catback system from a company down that way, it looked and sounded great and had lasted many years and is now fitted on another members car.

[Tomyspeedy]

Im in North Devon but I intend on getting this project car on the road, so I can travel to get it done somwhere.

[ripped_fear]

Im in North Devon but I intend on getting this project car on the road, so I can travel to get it done somwhere.

 

I cant remember where it was the previous owner had got the one made that was on it. Jonc on here was the previous owner to me, so maybe worth a pm to see if he remembers. I had the car 5 years so it must have been fitted 6+ years and like I say I sold it on to another member too.

 

If Jon can remeber pm josesupra as he owns it now and will habe the recipt in the history. May be local to you, never know, thats if the company are still going.

[Axle]

If its a 3" system loads of places do it now you are looking at around 500 though

 

I take it you have no idea on my build

 

Try 5 inch

[TBDevelopments]

Ive done a few in the past,

 

Sorry dont have anything to upload but a few examples of my fabrication on my facebook blog.

 

http://Www.facebook.com/tbdevelopments

[Tomyspeedy]

Thanks for all the help peoples.

 

The car isn't running as well as it could be so I feel a new exhaust and a tune/remap would be ideal.

Its a Yb engine from the sierra sapphire Cosworth (sorry ford haters) but it really needs someone who knows what they're doing to have a look.

 

Tim thanks for the offer, I won't be doing anything this winter but I'll deffintly be in touch closer to the time. It's an engine and running gear in a different shell so no off the shelf exhaust will fit. The current one has been crushed by many speed bumps, car has since been raised to a usable height.

 

I may also be after a fuel tank and swirl pot fabricated aswell.

 

While I'm thinking about it.... Would you be able to fabricate a couple of decats with a flexible section included?

(unsure if anyone already makes these)