Tommyd16 Posted November 24, 2015 Share Posted November 24, 2015 Just wandering instead of drilling the oil pan can a TT oil pan be used instead? Link to comment Share on other sites More sharing options...
Supraleeturbo Posted November 24, 2015 Share Posted November 24, 2015 Yer just use a tt sump mate and get a tt oil pump while you at it Link to comment Share on other sites More sharing options...
trebor69 Posted November 24, 2015 Share Posted November 24, 2015 They are the same shape and fitment but it's not the lower oil pan that you'd need to replace/drill, it's the upper sump housing where the return goes, it's ally and is the same shape as the bottom of the block. Link to comment Share on other sites More sharing options...
Style Posted November 24, 2015 Share Posted November 24, 2015 (edited) TT oil pump will blow the main crank seal on an NA Iirc. They produce too much pressure. Edited November 24, 2015 by Style (see edit history) Link to comment Share on other sites More sharing options...
Josh42 Posted November 24, 2015 Share Posted November 24, 2015 TT oil pump will blow the main crank seal on an NA Iirc. They produce too much pressure. I'm using a GTE oil pump, no issues. I just had to install an oil restrictor on the turbo feed Link to comment Share on other sites More sharing options...
buster Posted November 24, 2015 Share Posted November 24, 2015 I have been told to remove one of the springs in the tt oil pump dose the trick Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now