a98pmalcolm Posted October 15, 2015 Share Posted October 15, 2015 Hey all. Fitting my SRD inlet manifold & TB with injectors new fuel lines ect next month I'm sure my mate at his workshop can suss it out and I know what goes were with most of it but would like to check with you all were I need to put OEM fittings. I have numbered in red to make things a little easier to advise me. I notice couple are already plugged up. Thanks in advance Paul Quote Link to comment Share on other sites More sharing options...
FOSTA Posted October 15, 2015 Share Posted October 15, 2015 I also need to know this. Keeping any eye on this. Quote Link to comment Share on other sites More sharing options...
Lee P Posted October 15, 2015 Share Posted October 15, 2015 1 and 2 Top vac ports are usually blanked off 3 is usually brake booster 4 is idle control valve 10 is power steering pump 11 and 12 block off 8 is for the stock cam cover breather if your using it 7 is air temp sensor 9 we usually block off but it's for the charcoal canister valve 5 and 6 you can use for any thing you need (map sensor, FPR ect) Quote Link to comment Share on other sites More sharing options...
a98pmalcolm Posted October 15, 2015 Author Share Posted October 15, 2015 (edited) 1 and 2 Top vac ports are usually blanked off 3 is usually brake booster 4 is idle control valve 10 is power steering pump 11 and 12 block off 8 is for the stock cam cover breather if your using it 7 is air temp sensor 9 we usually block off but it's for the charcoal canister valve 5 and 6 you can use for any thing you need (map sensor, FPR ect) Awesome thanks Lee. This will come useful for others And I believe the circled red bit is the brake booster? Edited October 15, 2015 by a98pmalcolm (see edit history) Quote Link to comment Share on other sites More sharing options...
Lee P Posted October 15, 2015 Share Posted October 15, 2015 Awesome thanks Lee. This will come useful for others And I believe the circled red bit is the brake booster? http://i.imgur.com/KKHHO6W.jpg That's it, that should bolt straight into the plenum on top Quote Link to comment Share on other sites More sharing options...
FOSTA Posted October 15, 2015 Share Posted October 15, 2015 What idle control valve are you using mate? Also is that a q45 throttle body? What size are them in MM? Quote Link to comment Share on other sites More sharing options...
Lee P Posted October 15, 2015 Share Posted October 15, 2015 What idle control valve are you using mate? Also is that a q45 throttle body? What size are them in MM? Will be stock idle control valve and a Q45 90mm TB Quote Link to comment Share on other sites More sharing options...
FOSTA Posted October 15, 2015 Share Posted October 15, 2015 Awesome cheers Lee! Quote Link to comment Share on other sites More sharing options...
a98pmalcolm Posted October 16, 2015 Author Share Posted October 16, 2015 Perfect. You have been a great help lee :-) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.