zedhex Posted September 12, 2015 Share Posted September 12, 2015 I need a 3" downpipe to go between by turbo and exhaust. It for my single turbo conversion using an OBX manifold - if there are none around, does anyone know where I can get one made? Link to comment Share on other sites More sharing options...
j_jza80 Posted September 12, 2015 Share Posted September 12, 2015 Just go to your local exhaust fabricator or Powerflow dealer If you need a bung welded in, make sure you get it done first time to save additional expense. Link to comment Share on other sites More sharing options...
a98pmalcolm Posted September 13, 2015 Share Posted September 13, 2015 Maybe Paul at whifbitz? Link to comment Share on other sites More sharing options...
mellonman Posted September 13, 2015 Share Posted September 13, 2015 Night mare to find one with correct fitment, I ended up making my own 3.5 inch down / mid pipes. 3 7nch is alot easier though as many places can bend it Link to comment Share on other sites More sharing options...
zedhex Posted September 16, 2015 Author Share Posted September 16, 2015 bumpity bump Link to comment Share on other sites More sharing options...
Recommended Posts