walkerstrider Posted September 10, 2015 Share Posted September 10, 2015 Had the engine out and swapped fully working box onto donor engine for na-t build. Put it all back together finally got it running but don't seem to have drive in any gear! Will creep if revved high! What would cause this? Every thing went back together as it came out! Link to comment Share on other sites More sharing options...
Benjy Posted September 10, 2015 Share Posted September 10, 2015 What's the fluid level look like? Link to comment Share on other sites More sharing options...
walkerstrider Posted September 10, 2015 Author Share Posted September 10, 2015 Topped fluid up, I'm now getting gears but it's still not right. Link to comment Share on other sites More sharing options...
Swampy442 Posted September 10, 2015 Share Posted September 10, 2015 Cleaned/changed the filter? Link to comment Share on other sites More sharing options...
TheTurtleshead Posted September 10, 2015 Share Posted September 10, 2015 Have you bled the box properly? I.e. running, foot on the brake, cycle slowly through all the gears and back to park. Check level again. Repeat until correct. Link to comment Share on other sites More sharing options...
Benjy Posted September 10, 2015 Share Posted September 10, 2015 Have you bled the box properly? I.e. running, foot on the brake, cycle slowly through all the gears and back to park. Check level again. Repeat until correct. Link to comment Share on other sites More sharing options...
walkerstrider Posted September 10, 2015 Author Share Posted September 10, 2015 Yeah, seems to be the problem, doesn't matter at the min. Got oil leak from return flange on sump! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now