Ecumaster EMU Wiring Problems

[Silece2k6]

Hello everybody.

I'm just going to wire my EMU.

 

However, there are a few pins that I can not identify.

 

The EMU wants the CAM Angle Sensor 1Deg and 120deg, at the ECU pinout There Are No. 26 and 27 (ECU pinout) Cam Angle Sensor, but that is what?

 

I also need the Fuel Pump Relay (No.21 / 22 ECU pinout?)

 

And what is the ECCS relay and AAC Relay (Skyline)

 

My biggest Problems are the AUX Pins for the EMU.

 

I added a Full wiring Diagram for a RB25 and my "actualy" Pinout for the Supra.

 

Maybe someone can help me with this

 

PS: "B = E10" "A = E9"

 

Regards from Germany

Patrick

[Tricky-Ricky]

Edit: sorry wrong ECU:innocent:.

Edited September 6, 2015 by Tricky-Ricky (see edit history)

[Shane]

EMU just needs the crank angle sensor, no cam, fuel pump relay is also not needed as the std ECU takes care of all the mundane stuff like ECCS and AAC,

and are you talking about the aux sockets on the front panel? if so they are for things like AFR and MAP inputs.

 

Ricky the OP is referring to a ECUmaster EMU not a Greddy, not sure if the above applies. Nodalmighty has installed a few of the ECUMaster EMUs. I run a ECUMaster DET3, but thats just a piggy back not a standalone as the EMU is. http://www.ecumaster.co.uk/products/engine-management-unit

[Tricky-Ricky]

Ahhh right, not heard of that one...doe's it show:D oh well better edit my post.

Edited September 7, 2015 by Tricky-Ricky (see edit history)

[sebas]

Try contact directly with ECUMASTER They are very helpful and speak Polish (as they are Polish) English and I'm pretty sure German.

 

http://www.ecumaster.com/en/

 

https://www.facebook.com/ECUMASTER?fref=ts

[Silece2k6]

Try contact directly with ECUMASTER They are very helpful and speak Polish (as they are Polish) English and I'm pretty sure German.

 

http://www.ecumaster.com/en/

 

https://www.facebook.com/ECUMASTER?fref=ts

 

Thanks, i contact Ecumaster and they send me a full wiring diagram :-)