ripped_fear Posted August 12, 2015 Share Posted August 12, 2015 So it appears it isnt third time lucky. One of the studs that screws into the side of the engine that allows you to put a nut on the end to hold the maifold to the engine, has decided it doesnt want to screw in any more. Suggestions? guessing the thread has died but seems starange as the studs thread itself look ok and it hasnt bee cross threaded. And need the car on the road in the next couple of hours as its off to have the LSD fitted. HELP Link to comment Share on other sites More sharing options...
boostman Posted August 12, 2015 Share Posted August 12, 2015 Does it just turn in the hole or is it jamming up? Link to comment Share on other sites More sharing options...
Slam Posted August 12, 2015 Share Posted August 12, 2015 Do the studs have a shorter thread on one end. Or are they the same Link to comment Share on other sites More sharing options...
Slam Posted August 12, 2015 Share Posted August 12, 2015 Wrong way round Link to comment Share on other sites More sharing options...
ripped_fear Posted August 12, 2015 Author Share Posted August 12, 2015 Does it just turn in the hole or is it jamming up? It just spins, can push the stud straight into the hole Do the studs have a shorter thread on one end. Or are they the same It has a longer end on the side that protrudes through the manifold. Link to comment Share on other sites More sharing options...
Josh42 Posted August 12, 2015 Share Posted August 12, 2015 Helicoil it mate. Link to comment Share on other sites More sharing options...
David P Posted August 12, 2015 Share Posted August 12, 2015 Put it back together without that stud, maybe it'll blow, but at least you will stay on target for the diff swap and whilst it's there, there may be a mickanic that's not spannerlexic and can fix it for you? Link to comment Share on other sites More sharing options...
boostman Posted August 12, 2015 Share Posted August 12, 2015 Put it back together without that stud, maybe it'll blow, but at least you will stay on target for the diff swap and whilst it's there, there may be a mickanic that's not spannerlexic and can fix it for you? This sounds like a plan Link to comment Share on other sites More sharing options...
ripped_fear Posted August 12, 2015 Author Share Posted August 12, 2015 Wrong way round 100% not Helicoil it mate. Any idea how I find out which one I need? Put it back together without that stud, maybe it'll blow, but at least you will stay on target for the diff swap and whilst it's there, there may be a mickanic that's not spannerlexic and can fix it for you? Im going to put it back together and get the diff done as you say. Would hardly call myself spannerlexic Its only been the manifold job that has ever caused me an issue from start to finish. One thing which is good is it doesnt actually seem to be blowing but still want it sorted. Link to comment Share on other sites More sharing options...
Josh42 Posted August 12, 2015 Share Posted August 12, 2015 Find out the thread of the stud you are using. If you buy a decent kit, It should come with the drill bit etc that you need Link to comment Share on other sites More sharing options...
David P Posted August 12, 2015 Share Posted August 12, 2015 You may be lucky and find that the nut had walked down the stud and has only stripped the first few threads out of the aluminium head, if so, fit a stud without a shoulder which will reach into 10mm of thread at the bottom of the hole that is unused with a stock stud. If that doesn't work, helicoil it or re-tap a size up. Link to comment Share on other sites More sharing options...
ripped_fear Posted August 12, 2015 Author Share Posted August 12, 2015 Thanks guys will chat to cole about it later, fed up of the job and to top things off the weird noise, (the hole reason for swapping decats) is still there, only leaves the second de-cat to be the cause! Seems weird but must be the reason. Link to comment Share on other sites More sharing options...
David P Posted August 12, 2015 Share Posted August 12, 2015 Are you using the correct size gaskets for the flanges? Link to comment Share on other sites More sharing options...
ripped_fear Posted August 12, 2015 Author Share Posted August 12, 2015 Are you using the correct size gaskets for the flanges? All gaskets are 2.5" as thats what size pipe work im using. I have this time used these on the 1st decat-manifold joins to as last time I used the liquid gasket stuff. Link to comment Share on other sites More sharing options...
ripped_fear Posted August 12, 2015 Author Share Posted August 12, 2015 Ok just taken it round the block, I take back the coment about the noise, if you blip the throttle at stand still you can hear it high in the rev range but when driving sounds much better and am happy with it as long as I get the stud sorted, the other good thing is that it isnt blowing either. Link to comment Share on other sites More sharing options...
mattdavies Posted August 12, 2015 Share Posted August 12, 2015 Ok just taken it round the block, I take back the coment about the noise, if you blip the throttle at stand still you can hear it high in the rev range but when driving sounds much better and am happy with it as long as I get the stud sorted, the other good thing is that it isnt blowing either. Glad you got it sorted and you are happy with it. Text you as i was going to offer you a 2nd decat swap as i have a 2.5" one aswell Link to comment Share on other sites More sharing options...
trebor69 Posted August 12, 2015 Share Posted August 12, 2015 So it appears it isnt third time lucky. One of the studs that screws into the side of the engine that allows you to put a nut on the end to hold the maifold to the engine, has decided it doesnt want to screw in any more. Suggestions? guessing the thread has died but seems starange as the studs thread itself look ok and it hasnt bee cross threaded. And need the car on the road in the next couple of hours as its off to have the LSD fitted. HELP TCB do replacement slightly oversize studs, I've used them and swear by them Link to comment Share on other sites More sharing options...
ripped_fear Posted August 12, 2015 Author Share Posted August 12, 2015 TCB do replacement slightly oversize studs, I've used them and swear by them Cheers for the heads up, didnt realise TCB do them. its the thread on the engine unfortunately that have died, but may aswell get a new stud too. Link to comment Share on other sites More sharing options...
David P Posted August 12, 2015 Share Posted August 12, 2015 Cheers for the heads up, didnt realise TCB do them. its the thread on the engine unfortunately that have died, but may aswell get a new stud too. Quite clearly you don't understand how nuts & bolts work, have a chat with your micknick before pressing any more buttons about it. Link to comment Share on other sites More sharing options...
ripped_fear Posted August 12, 2015 Author Share Posted August 12, 2015 Just seen he put oversized, severs me right for skim reading. Assumed he ment OEM replacements, like for like. Link to comment Share on other sites More sharing options...
trebor69 Posted August 12, 2015 Share Posted August 12, 2015 It's only the block side of the stud that is oversize, they do the appropriate tap too and it's a simple job and they are SOLID. I used helicoils years ago in my motorbike heads but they never felt strong, you could always feel them stretch........oversize studs ftw. Link to comment Share on other sites More sharing options...
Chris Wilson Posted August 12, 2015 Share Posted August 12, 2015 A properly inserted Helicoil in aluminium alloy forms a thread far stronger than one just tapped direct in the alloy. All Rolls Royce engines used to have all in alloy threads of any importance Helicoiled from the get go. Link to comment Share on other sites More sharing options...
ripped_fear Posted August 12, 2015 Author Share Posted August 12, 2015 A properly inserted Helicoil in aluminium alloy forms a thread far stronger than one just tapped direct in the alloy. All Rolls Royce engines used to have all in alloy threads of any importance Helicoiled from the get go. Have spoken to Cole who just fitted my LSD and he has a full helicoil kit so am going to be going back one eve to sort it out thanks for the advice everyone luckily its not blowing for now! Link to comment Share on other sites More sharing options...
Coleboy Posted August 12, 2015 Share Posted August 12, 2015 We will sort it out Jake, not the end of the world, could be worse, could be snapped off in the head etc etc....... Link to comment Share on other sites More sharing options...
ripped_fear Posted August 12, 2015 Author Share Posted August 12, 2015 We will sort it out Jake, not the end of the world, could be worse, could be snapped off in the head etc etc....... cheers matey. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now