TT Paul Posted August 8, 2015 Share Posted August 8, 2015 Ended up getting box from lee at srd and shimmed by david p thanks again to both. so i got car recovered today to my local mechanic ready for monday and new box and 3200 hi stall . I shall update monday when i hope to be back on the rd and see how it all drives together.[emoji3] Quote Link to comment Share on other sites More sharing options...
mellonman Posted August 8, 2015 Share Posted August 8, 2015 Good luck with it paul , but you still need to look at how the aem runs the gearing , so gutted you cant get on the old aem forum there was quite abit of info about it Quote Link to comment Share on other sites More sharing options...
Supraleeturbo Posted August 8, 2015 Share Posted August 8, 2015 Have you had it so it can handle the extra torque Mate ? Quote Link to comment Share on other sites More sharing options...
TT Paul Posted August 9, 2015 Author Share Posted August 9, 2015 its been shimmed so gear change is quicker and some stop slip to increase viscosity, raise oil pressure so should help with strain on box , lui been running the same setup a while, so get that setup then look at gearchange Quote Link to comment Share on other sites More sharing options...
TT Paul Posted August 10, 2015 Author Share Posted August 10, 2015 Well its off 2hrs later. Quote Link to comment Share on other sites More sharing options...
Slam Posted August 10, 2015 Share Posted August 10, 2015 Hope it go's ok bud Quote Link to comment Share on other sites More sharing options...
David P Posted August 10, 2015 Share Posted August 10, 2015 Why has the flex-plate been removed? Quote Link to comment Share on other sites More sharing options...
TT Paul Posted August 10, 2015 Author Share Posted August 10, 2015 (edited) Check rear seal fit lower profile bolts for hi stall T c removed below Edited August 10, 2015 by TT Paul (see edit history) Quote Link to comment Share on other sites More sharing options...
David P Posted August 10, 2015 Share Posted August 10, 2015 I forgot about the sexy bolts, make sure that the flex plate goes back on the right way around, the marks on it should show, but if not fit welded side out. Quote Link to comment Share on other sites More sharing options...
mellonman Posted August 10, 2015 Share Posted August 10, 2015 where did you get the hi stall from mate and what stall did you go for ? Quote Link to comment Share on other sites More sharing options...
TT Paul Posted August 10, 2015 Author Share Posted August 10, 2015 Lee think its 3200 . And all good sexy bolts to . just doing brakes Quote Link to comment Share on other sites More sharing options...
TT Paul Posted August 10, 2015 Author Share Posted August 10, 2015 Well driven home at 10mph but its alive Quote Link to comment Share on other sites More sharing options...
Slam Posted August 10, 2015 Share Posted August 10, 2015 Ideal mate. Tomorrow you can go for 20mph Quote Link to comment Share on other sites More sharing options...
TT Paul Posted August 10, 2015 Author Share Posted August 10, 2015 Twat. Traffic and its wet so abit peed off with that cant apply throttle Quote Link to comment Share on other sites More sharing options...
Slam Posted August 10, 2015 Share Posted August 10, 2015 Knob Quote Link to comment Share on other sites More sharing options...
TT Paul Posted August 10, 2015 Author Share Posted August 10, 2015 Head Quote Link to comment Share on other sites More sharing options...
Slam Posted August 10, 2015 Share Posted August 10, 2015 We going to get on realy well on v2. Promise me not farting Quote Link to comment Share on other sites More sharing options...
TT Paul Posted August 10, 2015 Author Share Posted August 10, 2015 Im taking an old fart so unlucky for me Quote Link to comment Share on other sites More sharing options...
Slam Posted August 10, 2015 Share Posted August 10, 2015 Oooo bitch talk. You gonna pay Quote Link to comment Share on other sites More sharing options...
TT Paul Posted August 10, 2015 Author Share Posted August 10, 2015 Na not paying use your pension bud.. Quote Link to comment Share on other sites More sharing options...
supra matt Posted August 23, 2015 Share Posted August 23, 2015 So what was the out come of this then mate, all sorted now Quote Link to comment Share on other sites More sharing options...
T14PPA Posted August 23, 2015 Share Posted August 23, 2015 How did it go paul? Just fitted my david p gearbox and 3600 high stall and it seems to hesitate slightly when you full throttle off the lights Quote Link to comment Share on other sites More sharing options...
TT Paul Posted August 24, 2015 Author Share Posted August 24, 2015 Well from pull off it picks up about 1400rpm needs a lock up switch. I have a 3200 hi stall i think. But overall the gearchange is quicker than stock its only been shimmed. Quote Link to comment Share on other sites More sharing options...
T14PPA Posted August 24, 2015 Share Posted August 24, 2015 What do you mean a lock up switch? Quote Link to comment Share on other sites More sharing options...
David P Posted August 24, 2015 Share Posted August 24, 2015 Don't you boys go confusing each other, Paul's Supra has an AEM ECU. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.