Jump to content
The mkiv Supra Owners Club

Battery longitivity


Jellybean

Recommended Posts

Out of curiosity how long does your battery last with the alarm on ?

 

Mine dies after about 10-12 days , halfords battery, 2-3 years old

 

Mine doesn't even last that, usually about 5-7 days but mines on a trickle charger so doesn't matter :)

Link to comment
Share on other sites

Mine usually lasts about 5 weeks before it goes flat. The longest I have left it was 6 weeks and it kicked over. Unfortunately I did leave it for 7 weeks and it was flat. It has since decided even after a slow charge that it won't retain a charge. So I need a new battery. I'm thinking about a Optima yellow top, purely because they are robust and can handle repeated total discharges.

Link to comment
Share on other sites

depends on what amp battery you have as well, but I would say a 3year old battery lasting 10-12 days with an alarm is not too bad , but alarm depending as I have a proximity alarm which goes off everytime someone goes near it draining mine even more .

Link to comment
Share on other sites

I'm probably gonna remove my whole alarm as its so sensitive and goes off all the f-ing time even when I've lowered the sensitivity setting to the lowest.

 

I never have the battery connected anyway so the alarm really doesnt do anything lol

Link to comment
Share on other sites

LOL longevity.....mine's a Bosch and has been on the car since I got it (3 years), longest I've left it is three weeks and it still turned over and fired up no problem.

If you use your car regular then your battery will last longer/be stronger than if left for longer periods.

Link to comment
Share on other sites

A battery, even with alarm should do at least 4 weeks. I can only assume a few of you have power drains somewhere.

 

If your alarm installs are anything like the two I have inherited I would look at these first. I had my brother reinstall the Clifford alarms on both my cars as they were so badly done. Luckily for me he's an Auto Electrician :)

Link to comment
Share on other sites

A battery, even with alarm should do at least 4 weeks. I can only assume a few of you have power drains somewhere.

 

If your alarm installs are anything like the two I have inherited I would look at these first. I had my brother reinstall the Clifford alarms on both my cars as they were so badly done. Luckily for me he's an Auto Electrician :)

 

Can you ask your brother if its worth checking the drain on the battery with the alarm on , and what is acceptable :)

Link to comment
Share on other sites

Yes you should do that. That's what he did on mine. I'll ask him now about a reasonable figure for the drain and get back to you.

 

Looks like its 50MA

 

 

http://www.mkivsupra.net/vbb/showthread.php?237136-People-with-Alarms-specifically-the-Clifford-650/page2

 

Mine is a 650MkII, but the current draw shouldn't be much (if any) different to the original 650.

 

When the alarm is activated and the sensors have come on, the total drain on the battery (including whatever the head unit, internal clock etc takes) is 53 - 63mA. The variation will be down to the flashing alarm LED and probably also the way some the four sensors work.

 

When the alarm is in 'valet' mode the drain is 43mA steady.

 

When the alarm is off and starting is immobilised (sensors are not activated), the drain is 37mA - 43mA (varies due to flashing LED).

Link to comment
Share on other sites

Looks like its 50MA

 

 

http://www.mkivsupra.net/vbb/showthread.php?237136-People-with-Alarms-specifically-the-Clifford-650/page2

 

Mine is a 650MkII, but the current draw shouldn't be much (if any) different to the original 650.

 

When the alarm is activated and the sensors have come on, the total drain on the battery (including whatever the head unit, internal clock etc takes) is 53 - 63mA. The variation will be down to the flashing alarm LED and probably also the way some the four sensors work.

 

When the alarm is in 'valet' mode the drain is 43mA steady.

 

When the alarm is off and starting is immobilised (sensors are not activated), the drain is 37mA - 43mA (varies due to flashing LED).

 

Bingo. He has just come back with 50Ma or 0.05 on most multimeters.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.