Bizzyfingers Posted July 18, 2015 Share Posted July 18, 2015 I'm wanting to strip the original manufacturer's coating on the dashboard so I can paint them my own colour. I've seen folks in the US use googone or something like that. Will thinners/panel wipe work? Link to comment Share on other sites More sharing options...
Bizzyfingers Posted July 18, 2015 Author Share Posted July 18, 2015 I just don't want to melt my dash Link to comment Share on other sites More sharing options...
Nic Posted July 18, 2015 Share Posted July 18, 2015 White spirit or meths will soften the coating so it can easily be scraped off, I've also read on here that brake fluid will do the same but not personally tried this. Link to comment Share on other sites More sharing options...
G9RGE Posted July 18, 2015 Share Posted July 18, 2015 I used oven cleaner foam.... spray it on, leave it for 5 minutes and then use the green side of the washing up sponge and it just rubbs off. took me no more than 30 minutes to do the lot :-) Link to comment Share on other sites More sharing options...
safcdixon Posted July 18, 2015 Share Posted July 18, 2015 I used meth thinnners it took ages tbh, if oven cleaner works quickly as george says above give that a shot, Link to comment Share on other sites More sharing options...
Ric Posted July 18, 2015 Share Posted July 18, 2015 brake fluid, took minutes. Link to comment Share on other sites More sharing options...
Dr_Doom Posted July 18, 2015 Share Posted July 18, 2015 I was actually reading up on this/searching the other day. From all the old posts I found it seems normal household bleach is one of the best things to use. Obviously it's probably best to do it outside and with gloves as it's nasty stuff Link to comment Share on other sites More sharing options...
Dr_Doom Posted July 18, 2015 Share Posted July 18, 2015 http://www.mkivsupra.net/vbb/showthread.php?79616-Rubber-coating&highlight=dash+bleach Posts #6 and #14 Link to comment Share on other sites More sharing options...
Mad Hatter Posted July 19, 2015 Share Posted July 19, 2015 +1 for oven cleaner Link to comment Share on other sites More sharing options...
Kendo11 Posted July 19, 2015 Share Posted July 19, 2015 http://www.mkivsupra.net/vbb/showthread.php?79616-Rubber-coating&highlight=dash+bleach Posts #6 and #14 Bleach, as per my own posts in that thread. Link to comment Share on other sites More sharing options...
TBDevelopments Posted July 19, 2015 Share Posted July 19, 2015 i ran mine through a fine shotblaster media. Comes up like brand new and keyed ready for paint. Gets in all the hard to reach areas Tim TB Developments Link to comment Share on other sites More sharing options...
kayjay0_7 Posted July 19, 2015 Share Posted July 19, 2015 I used brake fluid Link to comment Share on other sites More sharing options...
rider Posted July 19, 2015 Share Posted July 19, 2015 So the recommendation appears to be don't try to clean your dash with oven cleaner. Why would anyone want to remove the dash coating anyway? Link to comment Share on other sites More sharing options...
Bizzyfingers Posted July 19, 2015 Author Share Posted July 19, 2015 Because it's worn, scratched etc I want to paint it Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now