Jaypottsey Posted June 10, 2015 Share Posted June 10, 2015 Hi all, I was going to fit my boost gauge today but had all the panels around the dash out and can't see anywhere to run the hose, do you have to drill a hole or is there somewhere I didn't see thanks jason Link to comment Share on other sites More sharing options...
Tommyd16 Posted June 10, 2015 Share Posted June 10, 2015 There's a rubber grommet. Easier to see from engine bay side. Just near the brake resovoir but more towards the engine iirc Link to comment Share on other sites More sharing options...
Jaypottsey Posted June 11, 2015 Author Share Posted June 11, 2015 I don't have anywhere near the brake but ran it where the harness goes through Link to comment Share on other sites More sharing options...
Tsia Posted June 11, 2015 Share Posted June 11, 2015 IIRC there's a grommet below the glove box where you can easily get a 3mm vac hose through. More 'behind' it, than below it come to think of it. Link to comment Share on other sites More sharing options...
GTR Fever Posted June 11, 2015 Share Posted June 11, 2015 I ran mine through a rubber grommet thats almost behind the turbo unit. Car has a 1-1.5" rubber grommet originally, removed it and drilled a hole, ran the hose through it and re-install. Sealed around it with silicone and works very well so far. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now