Big Mark Posted May 17, 2015 Share Posted May 17, 2015 (edited) Whifbitz handling kit now fitted but I need to adjust the ride height of the coilovers and set up geometry. Currently top of wheel arch to ground heights are 643mm front and 689mm rear. Thinking of going for 655mm all around What are peoples heights and what size tyres do you have? (I realise it's tyre size dependent). Just calculated heights from wheel centre to top of arch. Fronts are 312mm and rears would be 357mm Edited May 17, 2015 by Big Mark Heights from wheel centre to top of arch added (see edit history) Quote Link to comment Share on other sites More sharing options...
np89 Posted May 17, 2015 Share Posted May 17, 2015 I think the front is dead on. Rear at 655 would probably be ok. Rear higher than the front will keep the back end light lol Quote Link to comment Share on other sites More sharing options...
David P Posted May 17, 2015 Share Posted May 17, 2015 The measurement needs to be from wheel centre to arch or nothing will make any sense because of different wheel sizes and tyre profiles. Quote Link to comment Share on other sites More sharing options...
Big Mark Posted May 17, 2015 Author Share Posted May 17, 2015 (edited) Good point. Car's at my mates so can't measure it but doing the maths centre of the front wheels to the arch would be 312mm and rears would be 357mm Edited May 17, 2015 by Big Mark (see edit history) Quote Link to comment Share on other sites More sharing options...
Ross C Posted May 18, 2015 Share Posted May 18, 2015 315mm and 355mm give or take a few. Quote Link to comment Share on other sites More sharing options...
Big Mark Posted May 19, 2015 Author Share Posted May 19, 2015 Thanks. So not that far from what I have now but mine looks so much higher than yours at the back. Quote Link to comment Share on other sites More sharing options...
Big Mark Posted May 24, 2015 Author Share Posted May 24, 2015 All done, Took the rears down 35mm and fronts up by 5mm. Makes the whole car around 30mm lower than stock. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.