masterfett Posted May 12, 2015 Share Posted May 12, 2015 Hi all, had today off work so did a few bits to the car, being i have had a fmic and walbro fuel pump sat in the kitchen for months now i thought i would crack on and fit the pump! I bought it from a member on here ages ago, but reading the instructions on fitting it, it would appear i should have got a "new wiring loom" with it. I dont! just the actual pump! any ideas where i can get one from? Quote Link to comment Share on other sites More sharing options...
heckler Posted May 12, 2015 Share Posted May 12, 2015 http://www.ebay.co.uk/itm/like/111659416952?limghlpsr=true&hlpv=2&ops=true&viphx=1&hlpht=true&lpid=108&chn=ps&device=c&rlsatarget=&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0-L&ff12=67&ff13=80&ff14=108&ff19=0 - ebay is your friend, just double check the pump model number... Quote Link to comment Share on other sites More sharing options...
safcdixon Posted May 12, 2015 Share Posted May 12, 2015 The loom is just spade connecters in a plastic unit with a short tail of wire you solder to the excisting loom, you could just use spade connectors and heat shrink Or do as hecklers linked and do it the easy way lol Quote Link to comment Share on other sites More sharing options...
masterfett Posted May 12, 2015 Author Share Posted May 12, 2015 thanks guys! i know its really lazy but i had hoped it would be plug and play, nothings ever as easy as you want it to be. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.