Big Mark Posted May 11, 2015 Share Posted May 11, 2015 I've stripped off my suspension arms ready to fit new poly bushes an am considering having them powder coated. Is it ok to do the arms with ball joints or will the heat from baking on the powder coat damage the ball joints? Link to comment Share on other sites More sharing options...
Iky Posted May 11, 2015 Share Posted May 11, 2015 I've stripped off my suspension arms ready to fit new poly bushes an am considering having them powder coated. Is it ok to do the arms with ball joints or will the heat from baking on the powder coat damage the ball joints? I would say it would, but I know others have done it. It's usually only an issue when the ball joints have nylon liners. Either way, without a grease nipple, grease will never get in there 100%. Link to comment Share on other sites More sharing options...
Dnk Posted May 11, 2015 Share Posted May 11, 2015 (edited) Speak to Ibrar He removed the dirt boots and re greased his ball joints and fitted new boots. The ball joint itself would cope with heat but the boot and grease would possibly melt http://www.mkivsupra.net/vbb/showthread.php?241651-My-Super-Widebody-Aero-VVTi-Turbo-6sp-project/page43 Edited May 11, 2015 by Dnk (see edit history) Link to comment Share on other sites More sharing options...
Big Mark Posted May 11, 2015 Author Share Posted May 11, 2015 I did message Ibrar a few weeks back but only got the arms off yesterday (bolts seized solid), need to get them back on the car Thursday and just don't have the time to get over to his so have dropped them off at a place next to work. No one said anything about the ball joints being an issue other than that the boots won't survive but I've already got spares ones for most of them. Link to comment Share on other sites More sharing options...
Big Mark Posted May 17, 2015 Author Share Posted May 17, 2015 Boots were ruined but I expected that and already had replacements ready to go on. Really happy with the outcome. Didn't take a pic of them off the car or the front fitted, but a pic of rears is below. Link to comment Share on other sites More sharing options...
Ian C Posted May 17, 2015 Share Posted May 17, 2015 Mmmmm how much did that cost? Link to comment Share on other sites More sharing options...
Big Mark Posted May 17, 2015 Author Share Posted May 17, 2015 £120 cash for 20 components. 2 x front lower arms 2 x front lower arm brackets that shocks and ARBs attach to 6 x rear lower arms 4 x front and rear bars that bolt across subframe 4 x ARB brackets 2 x ARB's Link to comment Share on other sites More sharing options...
Dnk Posted May 17, 2015 Share Posted May 17, 2015 Certainly cheap enough if they did all the prep as well Link to comment Share on other sites More sharing options...
Big Mark Posted May 17, 2015 Author Share Posted May 17, 2015 I took them off, pressed out the old bushes and then handed them over for blasting and powder coating. Link to comment Share on other sites More sharing options...
David P Posted May 17, 2015 Share Posted May 17, 2015 I taught paint technology and surface coatings for 20 years and don't understand the fascination for a cohesive coating in a wet place? For the same reason as for why rubberoid underseal is frowned upon. 2 coats of hammerite engine paint would look just as good, has more adhesion than cohesion, for less than 10% of the price and won't destroy rubber components. Link to comment Share on other sites More sharing options...
Big Mark Posted May 17, 2015 Author Share Posted May 17, 2015 Oh now you tell me, lol. I was under the impression that Powder Coating is tougher and more durable that paint so figured it would be the best option. Link to comment Share on other sites More sharing options...
David P Posted May 17, 2015 Share Posted May 17, 2015 It's a fad, like that plastidipshit. It sticks to itself better than the surface and when water gets under it, it keeps it there and promotes oxidisation beneath the prettyness. The components are heavy enough steel not to worry, but the ends will fluff up from rust underneath. Link to comment Share on other sites More sharing options...
Big Mark Posted May 17, 2015 Author Share Posted May 17, 2015 Dam. Good to know for future reference tho. Link to comment Share on other sites More sharing options...
Dnk Posted May 17, 2015 Share Posted May 17, 2015 Unless it chips i'd imagine it could be quite a while before you get any problems, saying that i steered away from powder coating the suspension and axle cases on my Range Rover purely because of where they are. Link to comment Share on other sites More sharing options...
Ian C Posted May 17, 2015 Share Posted May 17, 2015 Hmm so just hammerite it all black then? Link to comment Share on other sites More sharing options...
Big Mark Posted May 17, 2015 Author Share Posted May 17, 2015 I'd suggest at least getting it shot blasted first. Link to comment Share on other sites More sharing options...
Rob W Posted May 17, 2015 Share Posted May 17, 2015 I rubbed back and painted my lower arms in black hammerite smooth a few years back, still fine and not flaked off one bit. Perfect for the job. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now