Hitbox Junkie Posted April 20, 2015 Share Posted April 20, 2015 Im comming to the final stages of a project that im re engineering and looking to create a prototype but i need to find a reliable and cheapish pcb manufacture we use one for most of our other control boadd designs but im looking into alternatives Any suggestions? Link to comment Share on other sites More sharing options...
Wez Posted April 20, 2015 Share Posted April 20, 2015 I`ve not used them myself but these are based not too far from one of our offices in Reading :- http://www.active-pcb.com/ Link to comment Share on other sites More sharing options...
Sooty Posted April 20, 2015 Share Posted April 20, 2015 I mainly use PCBtrain for my work, the quality is very good and they have a large selection of options. Alternatively Ragworm are good too especially if you are after a simple 1 or 2 layer board with just 1oz copper. Link to comment Share on other sites More sharing options...
Chris Wilson Posted April 20, 2015 Share Posted April 20, 2015 I am messing with my main PC but a forum I am active on sent me a link to a guy who does professional PCB's in small quantities as a side line, and he's supposed to be very cheap. I can get the link later, but from memory he was advertising on the Rapid Online electronics site. Link to comment Share on other sites More sharing options...
Hitbox Junkie Posted April 20, 2015 Author Share Posted April 20, 2015 Im looking at simple 2 layer board with no through holes and track taking 10amps but room to go higehr designed at 15amps. Il check these options out thanks for the quick responce guys Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now