Big Mark Posted April 19, 2015 Share Posted April 19, 2015 (edited) I've only just found out about the speedmap setting that this item has so have been searching the forum for what people have set all 4 channels to and what speed map settings but can't find a cleaer answer. The link below is what a lot of people point to but couldn't find the settings for all 4 channels for J-spec car. http://www.mkivsupra.net/vbb/showthread.php?4547-Blitz-SBC-ID-SBC-ID-II-and-Powermeter/page2&highlight=Blitz Currenly my settings are: Channel 1, Set 52, Gain 15. Can somone with a J-spec full bpu auto car tell me their Set & Gain for each of the 4 channels and what speeds they have each channel assigned to on Speedmap? Edited April 19, 2015 by Big Mark (see edit history) Quote Link to comment Share on other sites More sharing options...
Big Mark Posted April 19, 2015 Author Share Posted April 19, 2015 Anyone???? Quote Link to comment Share on other sites More sharing options...
Big Mark Posted April 19, 2015 Author Share Posted April 19, 2015 Someone out there must have a j-spec car with one of these fitted and with all 4 channels being used in speedmap mode?............... Quote Link to comment Share on other sites More sharing options...
Branners Posted April 19, 2015 Share Posted April 19, 2015 I used to but that was 5 years ago and I cant remember how I set it. Didnt the thread you linked to above have my suggested settings? Quote Link to comment Share on other sites More sharing options...
Big Mark Posted April 19, 2015 Author Share Posted April 19, 2015 Only compete and correct settings covering all 4 channels that I saw was for your UK car. Quote Link to comment Share on other sites More sharing options...
Big Mark Posted April 20, 2015 Author Share Posted April 20, 2015 (edited) What advantage does using a speedmap have over using just 1 channel and is the difference noticeable or very subtle? Edited April 20, 2015 by Big Mark (see edit history) Quote Link to comment Share on other sites More sharing options...
Big Mark Posted April 25, 2015 Author Share Posted April 25, 2015 I'm still trying to find the correct settings to use the Speedmap setting Someone out there must be using it. Only J-spec settings I've been able to find online was this CH1. set 30 - gain 25 Ch2. set 35 - gain 30 CH2. Set 40 - gain 35 Ch4. Set 55 - gain 40 using the speed map Ch.1 to 20mph Ch.2 to 40mph Ch.3 to 80mph Ch.4 for the rest But do these look correct, peoples comments were mixed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.