jza800 Posted April 18, 2015 Share Posted April 18, 2015 (edited) i have a supra 1993 with 2jzgte where the abs light stayes on all the time, when i connect e1 to tc the slip con off light flashes, not the abs light.. what can be wrong??? Edited April 19, 2015 by jza800 (see edit history) Link to comment Share on other sites More sharing options...
ellis Posted April 18, 2015 Share Posted April 18, 2015 I had this for a while. Turned out to be a split/broken wire - chasing it down was hard! Garage did a direct link from the ecu to the abs motor to prove all was ok then set about tracing it. Link to comment Share on other sites More sharing options...
jza800 Posted April 18, 2015 Author Share Posted April 18, 2015 ok. but i cant get the abs light to flash when i bridge e1 to tc, it is only the slip off con that flashes like there is no error??? the abs control/block have been removede from the engine bay, because off paint, everthing have been removed from the enginebay because off paint.. i have bleeded the brake system with no problem.. so what can it be??? Link to comment Share on other sites More sharing options...
kar Posted April 19, 2015 Share Posted April 19, 2015 Try cleaning the abs sensors Link to comment Share on other sites More sharing options...
David P Posted April 19, 2015 Share Posted April 19, 2015 Try cleaning the abs sensors It could be that, yet I reckon more likely to be a wire that has been disturbed whilst "improving" your Supra. Link to comment Share on other sites More sharing options...
jza800 Posted April 19, 2015 Author Share Posted April 19, 2015 i did at last find the problem, the relay was faulty... Link to comment Share on other sites More sharing options...
David P Posted April 20, 2015 Share Posted April 20, 2015 Well done for finding your Gremlin, thank you for posting the solution. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now