Shaleskin Posted April 11, 2015 Share Posted April 11, 2015 Got some replacement standard turbo's from Dom1993 (SupraLee's old turbos) and now managed to fix the issue of it boosting at 2psi. It's set to the lowest it will go and yet when i reach 5k revs it's boosting up to 20psi. I've got a 2.5" pipe in replacement to the cat, then 3" back Blitz Nur Spec. Is it just the turbo's that can't take more than 1.2bar or is it that it can't be fueled for on the standard injectors? As if it's fueling I've got 650cc's running on a hardwired e-manage piggy back if that makes any difference? Any input would be great! Link to comment Share on other sites More sharing options...
Benjy Posted April 11, 2015 Share Posted April 11, 2015 J-Spec turbo's generally don't like anymore than 1.2 bar. Have you got a restrictor ring? Link to comment Share on other sites More sharing options...
Shaleskin Posted April 11, 2015 Author Share Posted April 11, 2015 Benjy said: J-Spec turbo's generally don't like anymore than 1.2 bar. Have you got a restrictor ring? In all honestly I don't know, I'd assume not if it's peaking past 1/1.2bar. Although I thought the restrictor ring size was 2.5" so having the 2.5" downpipe would've done it? What size ring would be ideal? Link to comment Share on other sites More sharing options...
Benjy Posted April 11, 2015 Share Posted April 11, 2015 No, it's smaller than that, I can't think off the top of my head the exact size. I'm sure someone will be along shortly to confirm... Link to comment Share on other sites More sharing options...
Scoot Posted April 11, 2015 Share Posted April 11, 2015 Restrictor ring size is 2" Link to comment Share on other sites More sharing options...
Swampy442 Posted April 11, 2015 Share Posted April 11, 2015 You need to remove the mbc, and throw it in the bin. Then run without a boost controller and see what you're getting. Then buy a quality EBC J spec turbos have been known to throw their turbines down the exhaust at anything over 1.1bar. Link to comment Share on other sites More sharing options...
Shaleskin Posted April 11, 2015 Author Share Posted April 11, 2015 Swampy442 said: You need to remove the mbc, and throw it in the bin. Then run without a boost controller and see what you're getting. Then buy a quality EBC J spec turbos have been known to throw their turbines down the exhaust at anything over 1.1bar. Aw but it's a turbosmart Hi & low boost setting MBC I thought 1.2bar was OK for these to be ran at? Where's the best place to buy a 2" restrictor then? Had a quick look on fleabay and found 2.5" and that's it... Link to comment Share on other sites More sharing options...
themodifiedkid Posted April 11, 2015 Share Posted April 11, 2015 Try Paul at Whifbitz, I know he sells them Link to comment Share on other sites More sharing options...
Swampy442 Posted April 11, 2015 Share Posted April 11, 2015 Yeah whifbitz, off the shelf. But the only way you're really going to know what your baseline boost is, is to remove/turn off any boost controllers you have. Link to comment Share on other sites More sharing options...
Scott Posted April 11, 2015 Share Posted April 11, 2015 Shaleskin said: Aw but it's a turbosmart Hi & low boost setting MBC I thought 1.2bar was OK for these to be ran at? Where's the best place to buy a 2" restrictor then? Had a quick look on fleabay and found 2.5" and that's it... That doesn't sound like an MBC to me. Are you sure about it being manual and not electronic? How does the "hi and low" setting work? Link to comment Share on other sites More sharing options...
Shaleskin Posted April 12, 2015 Author Share Posted April 12, 2015 (edited) Scott said: That doesn't sound like an MBC to me. Are you sure about it being manual and not electronic? How does the "hi and low" setting work? Yeah definitely manual, it's got 2 dial knobs in one device block which has wires going to a fighter style toggle switch to flick between the two. I'll get a pic shortly. Also, whoever's plumbed the BC up has taken the boost reading from the boost pipe going to the intercooler oppose from the nipple coming off the turbo housing. I assume this wouldn't make much of a difference as it's still being pressurized? (will get a pic of that too) Edited April 12, 2015 by Shaleskin Pictures! (see edit history) Link to comment Share on other sites More sharing options...
costas1 Posted April 12, 2015 Share Posted April 12, 2015 There is a chance that you already.have a ring but you keep hitting this boost..j spec are know for.overboosting a bit..check your air/fuel ratio and if you car its.mapped ok.you will.be fine..i.have.been running.1.2 for the last 10.years and its all good.. Link to comment Share on other sites More sharing options...
Scott Posted April 12, 2015 Share Posted April 12, 2015 Shaleskin said: Yeah definitely manual, it's got 2 dial knobs in one device block which has wires going to a fighter style toggle switch to flick between the two. I'll get a pic shortly. Also, whoever's plumbed the BC up has taken the boost reading from the boost pipe going to the intercooler oppose from the nipple coming off the turbo housing. I assume this wouldn't make much of a difference as it's still being pressurized? (will get a pic of that too) [ATTACH=CONFIG]199875[/ATTACH] [ATTACH=CONFIG]199876[/ATTACH] [ATTACH=CONFIG]199877[/ATTACH] That's nuts Link to comment Share on other sites More sharing options...
Chris Wilson Posted April 13, 2015 Share Posted April 13, 2015 No boost controller can reduce boost below the wastegate spring pressure, or in the case of the MKIV the pressure the exhaust back pressure allows on the stock turbos with the the cats removed. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now