afennell Posted September 4, 2005 Share Posted September 4, 2005 bit of bad news today, my wheels don’t fit over the uk calliper. Is there any chance there are any other brake kits that might fit?? As you all know bout me deciding about my turbos i have to look at all possibilities. Link to comment Share on other sites More sharing options...
merckx Posted September 4, 2005 Share Posted September 4, 2005 You could use some spacers if they need to come out a little! Link to comment Share on other sites More sharing options...
TLicense Posted September 4, 2005 Share Posted September 4, 2005 spacers The only brakes that are smaller than the UK's, as far as I know, are the Jap spec ones. Link to comment Share on other sites More sharing options...
merckx Posted September 4, 2005 Share Posted September 4, 2005 spacers I've got 3mm ones on the front, no problem . I wouldn't advise using ones that are too thick though. You might need longer studs to hold the wheels securely. Link to comment Share on other sites More sharing options...
afennell Posted September 5, 2005 Author Share Posted September 5, 2005 though as much, i would need too large a spacer. Link to comment Share on other sites More sharing options...
Guest Terry S Posted September 5, 2005 Share Posted September 5, 2005 Adam how much do you need? Link to comment Share on other sites More sharing options...
afennell Posted September 5, 2005 Author Share Posted September 5, 2005 about 2cm!!!! Link to comment Share on other sites More sharing options...
RobAce Posted September 5, 2005 Share Posted September 5, 2005 there is one way,how about we swap my jap rears for your uk ones then your wheels will fit Link to comment Share on other sites More sharing options...
afennell Posted September 5, 2005 Author Share Posted September 5, 2005 cant see any problems with swopping wheels with you, thats a very generous offer Link to comment Share on other sites More sharing options...
chilli Posted September 5, 2005 Share Posted September 5, 2005 I'm sure someone must make a decent wheel spacer kit? i.e. a properly made one that locates into the center of the hub (rather than floating around, located only buy the studs). A well made one should work ok, provided the "overall" offset doesn't change too wildley from standard - otherwise the wheelbearing isn't going to last as long and the handling is going to be very iffy. Does anyone make such a component? Link to comment Share on other sites More sharing options...
CJ Posted September 5, 2005 Share Posted September 5, 2005 I would speak to Ibrar at Pro Alloys as he is able to offer spacer solutions Link to comment Share on other sites More sharing options...
Guest Terry S Posted September 5, 2005 Share Posted September 5, 2005 I'm sure someone must make a decent wheel spacer kit? i.e. a properly made one that locates into the center of the hub (rather than floating around, located only buy the studs). A well made one should work ok, provided the "overall" offset doesn't change too wildley from standard - otherwise the wheelbearing isn't going to last as long and the handling is going to be very iffy. Does anyone make such a component? Yes H&R ( DRS series) and they come with replacement studs not extensions Link to comment Share on other sites More sharing options...
chilli Posted September 5, 2005 Share Posted September 5, 2005 Cheers Terry, you mean these http://www.performancealloys.com/alloy_wheel_spacers.asp then. They look excellent, I might be needing some myself for a bit of extra room for the uk calipers - I can't afford (or justify) new wheels... Do you know of a good distributor for these? Link to comment Share on other sites More sharing options...
Guest Terry S Posted September 5, 2005 Share Posted September 5, 2005 yeah thats them. Ibrar @ Pro Alloys can get them. Link to comment Share on other sites More sharing options...
chilli Posted September 5, 2005 Share Posted September 5, 2005 there is hope for me and uk spec brakes after all lol Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now