George86 Posted March 25, 2015 Share Posted March 25, 2015 Hi guys, I need help. I'd need to know what are the Positive and negative in the bulbs of indiglo gauge. I circled in the image parts that interest me. I bought some LED bulbs that have fixed polarity, so I need to know which copper conductors which are positive and negative. thanks in advance. http://home.comcast.net/~michaelvanle/ledcluster1.jpg Link to comment Share on other sites More sharing options...
mattdavies Posted March 25, 2015 Share Posted March 25, 2015 Why dont you buy 501 Adapters off eBay then you can switch the polarity by turning them round http://www.ebay.co.uk/itm/T10-W5W-194-168-Adapter-for-Car-LED-Light-Panel-Lamp-Bulbs-FREE-SHIPPING-/221660182342?pt=LH_DefaultDomain_3&var=&hash=item339bf9f746 Link to comment Share on other sites More sharing options...
George86 Posted March 25, 2015 Author Share Posted March 25, 2015 (edited) because I did not know e now I do not have time to wait for the shipment. Edited March 25, 2015 by George86 (see edit history) Link to comment Share on other sites More sharing options...
mattdavies Posted March 25, 2015 Share Posted March 25, 2015 I believe on the Left hand side of the picture the three screws have IG+ , GND & SIG next to them. if you put a ring on the end and screw them onto the IG+ and GND screws you will have illuminated dash as soon as the car is turned on I may be wrong though Link to comment Share on other sites More sharing options...
George86 Posted March 25, 2015 Author Share Posted March 25, 2015 is there a diagram of the rear panel where you can see which are the parts copper positive and negative sides copper ...... I have attached a picture as an example of 'A / C unit. Link to comment Share on other sites More sharing options...
mattdavies Posted March 25, 2015 Share Posted March 25, 2015 Buy a cheap volt meter and test the polarity Link to comment Share on other sites More sharing options...
George86 Posted March 25, 2015 Author Share Posted March 25, 2015 ok.....thanks. Link to comment Share on other sites More sharing options...
Al Massey Posted March 25, 2015 Share Posted March 25, 2015 Or do a search on here and you will find the thread with a full fitting guide Link to comment Share on other sites More sharing options...
Ric Posted March 25, 2015 Share Posted March 25, 2015 Can be found here - http://www.internetwork.org.uk/pre_facelift_inst/pre_facelift_inst.htm about 2 thirds down the page. Link to comment Share on other sites More sharing options...
Nic Posted March 25, 2015 Share Posted March 25, 2015 I bought some LED bulbs that have fixed polarity, so I need to know which copper conductors which are positive and negative. thanks in advance. Why not just fit the LED bulbs, connect to the wiring loom and see if they light, if they don't just switch the bulbs around in the holders. Link to comment Share on other sites More sharing options...
heckler Posted March 25, 2015 Share Posted March 25, 2015 Can be found here - http://www.internetwork.org.uk/pre_facelift_inst/pre_facelift_inst.htm about 2 thirds down the page. beat me to it... Link to comment Share on other sites More sharing options...
George86 Posted March 25, 2015 Author Share Posted March 25, 2015 thank you all for your interest - - - Updated - - - Can be found here - http://www.internetwork.org.uk/pre_facelift_inst/pre_facelift_inst.htm about 2 thirds down the page. prefect! thank you!!!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now