Dave Posted March 19, 2015 Share Posted March 19, 2015 i will be fitting this easter weekend have removed all the old silicone from the replacement, one question when i put the silicon on for re fitting do i let it go off a bit before bolting it tight . Link to comment Share on other sites More sharing options...
bignum Posted March 19, 2015 Share Posted March 19, 2015 No, fit it straight on, note, don`t overdo it with the silicon. Link to comment Share on other sites More sharing options...
CHICO-SUPRA Posted March 20, 2015 Share Posted March 20, 2015 Hi Dave, like big num said its straight on. Just make sure where the lower pan mates to the upper pan it's free from oil,dirt,etc. I did this a while back and there is a guide on how to apply the sealant in the correct bead pattern in the TSRM. Follow that bud and everything should be fine. Link to comment Share on other sites More sharing options...
Dave Posted April 1, 2015 Author Share Posted April 1, 2015 Thanks guys Link to comment Share on other sites More sharing options...
Dave Posted April 1, 2015 Author Share Posted April 1, 2015 Hi Dave, like big num said its straight on. Just make sure where the lower pan mates to the upper pan it's free from oil,dirt,etc. I did this a while back and there is a guide on how to apply the sealant in the correct bead pattern in the TSRM. Follow that bud and everything should be fine. couldnt find the guide mate but should be ok . Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now