ATB Posted March 10, 2015 Share Posted March 10, 2015 I got a set of Volk GT-Cs 19x9,5 fronts 19x10,5 rears, but I am struggling to find the offset of the rears as I need new tires and I wan't to go wider if it's possible. By my calculations the offset is 33 mm But I would like some opinions here of what you guys think it is. I would also appreciate some opinions on how wide I can go with stock suspension and stock arches because 235 is slippery to say the least..... This is from lip to lip: and back of center to back lip: This is how it sits on the car: Quote Link to comment Share on other sites More sharing options...
np89 Posted March 10, 2015 Share Posted March 10, 2015 My tte rims run 275 with no issues Quote Link to comment Share on other sites More sharing options...
np89 Posted March 10, 2015 Share Posted March 10, 2015 Offset 45 on the rear Quote Link to comment Share on other sites More sharing options...
np89 Posted March 10, 2015 Share Posted March 10, 2015 And they are 10.5 inch rears Quote Link to comment Share on other sites More sharing options...
Nic Posted March 10, 2015 Share Posted March 10, 2015 Wheel widths are measured from the inside edge of the wheel, so you'll need to take this into account when working out the offset. Quote Link to comment Share on other sites More sharing options...
ATB Posted March 10, 2015 Author Share Posted March 10, 2015 That made it a lot harder with the tire on Quote Link to comment Share on other sites More sharing options...
listy Posted March 11, 2015 Share Posted March 11, 2015 Looking at the wheel on the car, if that's a 235 tyre, I'd say you can easily stretch to at least a 255/265 as it sits. I know Wile coyote has these wheels on his, maybe worth a PM to him. Quote Link to comment Share on other sites More sharing options...
ATB Posted March 23, 2015 Author Share Posted March 23, 2015 Okay did a new accurate measurement and rim is 266mm and hub to edge is 160mm so that leaves me with 27 offset. I am thinking about 265/35 R19 with stock suspension/arches. Any inputs? Quote Link to comment Share on other sites More sharing options...
wile e coyote Posted March 23, 2015 Share Posted March 23, 2015 Is it not stamped on inside of the wheel spokes ? Quote Link to comment Share on other sites More sharing options...
ATB Posted March 23, 2015 Author Share Posted March 23, 2015 No nothing is stamped on the spokes just "19x" Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.