Virus Posted March 10, 2015 Share Posted March 10, 2015 Does anybody know how to get this loose? http://i.imgur.com/o9J1kIa.jpg And the roof lights? I think it clips off but if it does then mine is really hard to clip off lol, double checking cos dun wanna break nothin Link to comment Share on other sites More sharing options...
C_Strike Posted March 10, 2015 Share Posted March 10, 2015 If I remember correctly the interior dome light is clipped to the roof lining, im pretty sure I just pulled it carefully but firmly to prize it from the lining.. go careful though as it was a few years ago now so may be remembering it wrong lol Link to comment Share on other sites More sharing options...
Virus Posted March 10, 2015 Author Share Posted March 10, 2015 Yeah figured as much but it seemed really firmly stuck (got the right side out, but not the left side, figured maybe a little screw). The new one i got doesn't seem as nearly as stuck as this one lol. Any ideas for the hand grip thing (or how ever you call it?) Not even sure if this comes stock with supras Link to comment Share on other sites More sharing options...
safcdixon Posted March 10, 2015 Share Posted March 10, 2015 (edited) The light is screwed in, pop the light lense out with a small flathead screwdriver and there is two starhead screws to remove inside then it should just drop away from the roof The jesus handle you push in and pull the bottom downwards in a sliding motion then once the lower is out the bracket push the top upwards it should slide upwards, theres a bolt on each bracket hidden behind the handle you remove to release the small spacers and brackets Edited March 10, 2015 by safcdixon (see edit history) Link to comment Share on other sites More sharing options...
Virus Posted March 10, 2015 Author Share Posted March 10, 2015 The light is screwed in, pop the light lense out with a small flathead screwdriver and there is two starhead screws to remove inside then it should just drop away from the roof The jesus handle you push in and pull the bottom downwards in a sliding motion then once the lower is out the bracket push the top upwards it should slide upwards, theres a bolt on each bracket hidden behind the handle you remove to release the small spacers and brackets I tried pushing it out but it doesn't "unhook" from the clip if you know what i mean. I seen where the screw is though but can't seem to reach it properly :/ Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now