gray3787 Posted February 24, 2015 Share Posted February 24, 2015 Can I pipe up twin boost gauges for each of my stock twins?? Link to comment Share on other sites More sharing options...
ashbuster Posted February 24, 2015 Share Posted February 24, 2015 if you mean like 2 boost gauges then yes you can bud i had one setup to my gauge then another feed to my boost controller which also had a display for the boost and both read the same Link to comment Share on other sites More sharing options...
Tsia Posted February 24, 2015 Share Posted February 24, 2015 You usually plumb them in to the manifold pressure, therefore two boost gauges should give you the exact same result. If they don't, one or both of the gauges is broken. There is literally no reason to run 'one per turbo'. Link to comment Share on other sites More sharing options...
gray3787 Posted February 24, 2015 Author Share Posted February 24, 2015 Yea cheers bud I was trying to plumb one gauge for each turbo but spoke to Keron earlyer and he says it can't be done Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now