ShawnPreece Posted March 2, 2015 Author Share Posted March 2, 2015 (edited) You have been rather busy! Daunting stuff to see nothing inside the car Yeah hoping to have alot of the new stuff in this next weekend That passenger footwell looks rather busy! yeah is abit, im leaving that as it is as I dont want to get involved with the wiring really lol Edited July 19, 2017 by ShawnPreece (see edit history) Quote Link to comment Share on other sites More sharing options...
ShawnPreece Posted March 12, 2015 Author Share Posted March 12, 2015 (edited) got a few more pics after a busy weekend of working on the car: After dying the carpet I then put the carpet back in along with the roof lining, main dash and seats.... Then added some door cards..... Then came the Centre Console and Dash Panels.... And a Gear Knob plus Steering Wheel.... Im hoping after a good weekends work on it this weekend it'l be ready to drive around again until it goes in for the widearch Edited July 19, 2017 by ShawnPreece (see edit history) Quote Link to comment Share on other sites More sharing options...
supra_ufo Posted March 13, 2015 Share Posted March 13, 2015 is that from Jays car? looks cool Quote Link to comment Share on other sites More sharing options...
ShawnPreece Posted March 13, 2015 Author Share Posted March 13, 2015 is that from Jays car? looks cool Yes mate it is, thanks Quote Link to comment Share on other sites More sharing options...
Guest Risto Posted March 13, 2015 Share Posted March 13, 2015 White Supra and that interior! very nice mate! camcover going red too to match? Quote Link to comment Share on other sites More sharing options...
ShawnPreece Posted March 13, 2015 Author Share Posted March 13, 2015 White Supra and that interior! very nice mate! camcover going red too to match? Thanks nah I have a carbon one to go on, haven't started on the engine bay yet but will only be a quick job to swap over the bits I have, im going a mixture of polished and carbon in the engine bay Quote Link to comment Share on other sites More sharing options...
wattwatt Posted March 13, 2015 Share Posted March 13, 2015 Looks lovely Shawn and a good days work to get all that lot re-fitted. What is the leather on the dash like? Is it a good fit? I'm really tempted to have mine done in the future but read some horror story's about poor fit and moving/shrinking from sunlight and stuff! Quote Link to comment Share on other sites More sharing options...
ShawnPreece Posted March 14, 2015 Author Share Posted March 14, 2015 Looks lovely Shawn and a good days work to get all that lot re-fitted. What is the leather on the dash like? Is it a good fit? I'm really tempted to have mine done in the future but read some horror story's about poor fit and moving/shrinking from sunlight and stuff! Thanks mate yeah I have to admit it's a perfect job, I bought it like that it was done while a previous owner had it so when he was breaking his car I bought it off him and his attention to detail on his car was amazing and so luckily I got this off him and is a perfect fitment Quote Link to comment Share on other sites More sharing options...
Virus Posted March 14, 2015 Share Posted March 14, 2015 Shawn that interior is damn sexy as hell :o. Looks like a very clean car to me bud, nice one Quote Link to comment Share on other sites More sharing options...
ShawnPreece Posted March 14, 2015 Author Share Posted March 14, 2015 Shawn that interior is damn sexy as hell :o. Looks like a very clean car to me bud, nice one Thanks mate yeah is a very clean and tidy car, previous owner kept it in great condition Quote Link to comment Share on other sites More sharing options...
ShawnPreece Posted March 14, 2015 Author Share Posted March 14, 2015 (edited) Another update with pics after fitting the dash cam and the control panel in the centre console.... Edited July 19, 2017 by ShawnPreece (see edit history) Quote Link to comment Share on other sites More sharing options...
ShawnPreece Posted March 14, 2015 Author Share Posted March 14, 2015 (edited) Also been getting ready for the aftermarket bumper by making a thinner crash bar out of steel by using the existing aluminium one as a template.... Just waiting for the primer to set now before spraying it Edited July 19, 2017 by ShawnPreece (see edit history) Quote Link to comment Share on other sites More sharing options...
ShawnPreece Posted March 16, 2015 Author Share Posted March 16, 2015 Only just worked out how to put big pictures on the posts rather than just the thumbnail attachments that you have to click on so been through and updated the thread from the start Quote Link to comment Share on other sites More sharing options...
supra_ufo Posted March 16, 2015 Share Posted March 16, 2015 like the gadgets in the compartment, looks great Quote Link to comment Share on other sites More sharing options...
ShawnPreece Posted March 16, 2015 Author Share Posted March 16, 2015 like the gadgets in the compartment, looks great Cheers mate yeah I wanted to keep the dash as clutter free as I could so thought it was a good idea to make a little control panel in the centre console Quote Link to comment Share on other sites More sharing options...
Burna Posted March 17, 2015 Share Posted March 17, 2015 Looks good mate Quick question, why do you have two HKS EBC controllers? One in the centre console, and one on the dash? Thinking of moving mine from the centre console to the dash so I can easier try and use the scramble boost function. Quote Link to comment Share on other sites More sharing options...
ShawnPreece Posted March 17, 2015 Author Share Posted March 17, 2015 Looks good mate Quick question, why do you have two HKS EBC controllers? One in the centre console, and one on the dash? Thinking of moving mine from the centre console to the dash so I can easier try and use the scramble boost function. Thanks mate The box in the centre console is the one that adjusts the pressure setting of high boost and low boost and the box on the dash is the switch between high and low (and scramble). I tried to put as much as possible in the centre console to keep the dash clutter free but I had to put the one in the dash as changing between high and low boost (and scramble) is something I would want to do while driving Quote Link to comment Share on other sites More sharing options...
formatzero Posted March 17, 2015 Share Posted March 17, 2015 Wish i had half your skill bud,that looks great:) Quote Link to comment Share on other sites More sharing options...
ShawnPreece Posted March 17, 2015 Author Share Posted March 17, 2015 Wish i had half your skill bud,that looks great:) Thanks mate Quote Link to comment Share on other sites More sharing options...
ShawnPreece Posted March 19, 2015 Author Share Posted March 19, 2015 (edited) Got me some tyres through the post today Edited July 19, 2017 by ShawnPreece (see edit history) Quote Link to comment Share on other sites More sharing options...
Chris Bailey Posted March 19, 2015 Share Posted March 19, 2015 They're big! What sizes are your rims? You got modified arches? Quote Link to comment Share on other sites More sharing options...
ShawnPreece Posted March 19, 2015 Author Share Posted March 19, 2015 They're big! What sizes are your rims? You got modified arches? Yes mate going Ridox Widearch The rims are still on the way they will only be here mid april but they are 18x9.5 on the front and 18x12 on the rears I wanted to wait until I had the widearch put on so I could measure properly for the offsets and size but there isnt a massive choice of 18x12 wheels (unless I want to sell my house to fund them lol) and the ones I wanted wern't in till mid april and they only had a few coming in so I spoke to a few people that has had the same kit on there's to see the figures they were all getting for extra width and then ordered after speaking to them. I also was thinking of maybe a 325 tyre on the rear but I wanted R888's and I could only find 315 wide on a 18 inch wheel in R888's so I went for this Quote Link to comment Share on other sites More sharing options...
Virus Posted March 19, 2015 Share Posted March 19, 2015 I really like where this is going shawn! I'm so in love with the interior, How much did you pay for it? Did the TRD wheel come with the car or did you buy it seperatly? I love the rims too Cheers mate Quote Link to comment Share on other sites More sharing options...
ShawnPreece Posted March 19, 2015 Author Share Posted March 19, 2015 I really like where this is going shawn! I'm so in love with the interior, How much did you pay for it? Did the TRD wheel come with the car or did you buy it seperatly? I love the rims too Cheers mate Hi mate thankyou I got it off James on here when he was breaking his Supra, it cost me £2,500 which is a snippit of how much it cost to be done and it is still in as new condition now the steering wheel came with the interior Quote Link to comment Share on other sites More sharing options...
ShawnPreece Posted March 22, 2015 Author Share Posted March 22, 2015 (edited) A sneaky little pic of my new tyres for the supra next to my MR2 wheels lol Edited July 19, 2017 by ShawnPreece (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.