pedrosixfour Posted February 13, 2015 Share Posted February 13, 2015 And if they are going back I'd be taking a dump in them first. Quote Link to comment Share on other sites More sharing options...
Grasmt Posted February 13, 2015 Share Posted February 13, 2015 The oem baffles have a silicone beading between them and the covers themselves, obviously this doesnt help the situation nor does it dispute the fact that the baffles look shit but the oem one definetly come with a gasket sealant of types. Quote Link to comment Share on other sites More sharing options...
Jellybean Posted February 13, 2015 Author Share Posted February 13, 2015 Tell them that just from the monstrous look of the baffles & how they are fitted there is no way in this world or the next that you would be happy to fit these items to your engine as who knows what kind of disaster is waiting to work loose & fall out from behind the baffles after a bit of heat is applied. thanks Damien, they do look like an after taught I can see them coming back and saying the baffles are thread locked Quote Link to comment Share on other sites More sharing options...
RobUK Posted February 13, 2015 Share Posted February 13, 2015 How did you pay? Can you raise a dispute with the payment provider? Quote Link to comment Share on other sites More sharing options...
Jellybean Posted February 13, 2015 Author Share Posted February 13, 2015 The oem baffles have a silicone beading between them and the covers themselves, obviously this doesnt help the situation nor does it dispute the fact that the baffles look $#@! but the oem one definetly come with a gasket sealant of types. Cool , so the sealant wont FUBAR my engine , we are more concerned with the baffles coming loose and destroying my cams Quote Link to comment Share on other sites More sharing options...
Jellybean Posted February 13, 2015 Author Share Posted February 13, 2015 How did you pay? Can you raise a dispute with the payment provider? Last resort , I called MVP and emailed Scott at OCD so will see what they say first Quote Link to comment Share on other sites More sharing options...
Grasmt Posted February 13, 2015 Share Posted February 13, 2015 As a worst case scenario could you not unbolt them and thread lock them yourself? Quote Link to comment Share on other sites More sharing options...
RobUK Posted February 13, 2015 Share Posted February 13, 2015 Last resort , I called MVP and emailed Scott at OCD so will see what they say first I'd raise the dispute immediately, it will concentrate there efforts to resolve the issue and put them on the back foot if money is at risk.... Quote Link to comment Share on other sites More sharing options...
Jellybean Posted February 13, 2015 Author Share Posted February 13, 2015 As a worst case scenario could you not unbolt them and thread lock them yourself? But they are damaged , pissed about that too and the issue with the oil cap is a pig to get on or off Quote Link to comment Share on other sites More sharing options...
Jellybean Posted February 13, 2015 Author Share Posted February 13, 2015 I'd raise the dispute immediately, it will concentrate there efforts to resolve the issue and put them on the back foot if money is at risk.... Good thinking, put a hot poker up their ass ; I am a sucker for giving people the benefit of the doubt Quote Link to comment Share on other sites More sharing options...
Grasmt Posted February 13, 2015 Share Posted February 13, 2015 As said maybe as a worst case scenario, still id be the same, theres alot of money spent there and its not upto standards, hope it gets resolved easily for ya. Quote Link to comment Share on other sites More sharing options...
RobUK Posted February 13, 2015 Share Posted February 13, 2015 Good thinking, put a hot poker up their ass ; I am a sucker for giving people the benefit of the doubt So am I, but it doesn't sound like they are being very supportive and therefore just go for the weak spot Quote Link to comment Share on other sites More sharing options...
Jellybean Posted February 13, 2015 Author Share Posted February 13, 2015 Paypal said , Items where purchased on Black Friday 29-Nov-2014, took till now to arrive This dispute closed because it was opened for more than 45 days after the transaction date or did not meet other filing criteria. Quote Link to comment Share on other sites More sharing options...
RobUK Posted February 13, 2015 Share Posted February 13, 2015 (edited) Call them mate and explain Uk phone number is 0800 358 7929 Edited February 13, 2015 by RobUK (see edit history) Quote Link to comment Share on other sites More sharing options...
jazz1 Posted February 13, 2015 Share Posted February 13, 2015 I'm sure they will resolve this as it's their reputation! When I ordered my kit from Sumopower they provided the best service when some bits come damage! Quote Link to comment Share on other sites More sharing options...
Jellybean Posted February 13, 2015 Author Share Posted February 13, 2015 OCD works said they will get back to me in 2 hours Quote Link to comment Share on other sites More sharing options...
Jellybean Posted February 13, 2015 Author Share Posted February 13, 2015 Call them mate and explain Uk phone number is 0800 358 7929 Thanks will call them tomorrow Quote Link to comment Share on other sites More sharing options...
Jellybean Posted February 14, 2015 Author Share Posted February 14, 2015 OCD Works got back , looks like MVP messed up ; I dont know who or what products they sent me , Scott said my items are still in his Email FROM OCD Works First of all. Let me start saying i apologized for certain inncovinece that was cause. There is no denied on how baffle was sent that way you showing on picture.. We take full blame on those. Baffle that was supports to used in below the picture and also it was mistake by guy just started working here and i do take full responsibility of that.. However. You stated that those black glue cant be holding those baffle plate. Those are not glue and use same high temp oil resistant rtv that was just to just seal the baffle between the surface to baffle yet it is in there to keep from getting vibrate and rub off the from aluminum contacting each other so we can avoid any premature wear/shaving going in to motor. baffle was supports to be used with our laser cut piece which was supports to be put on.. however I had new guy started here and it is my fault that I was not present at the moment of quality control as well as shipping. I will like to send you correct baffle and you can replace with one that I will send. all of bolts are secure with red lock tight and it shouldn't be loose. if you want to have baffle without removable option then I would of welded on it to have less chance for anyone. but 90 % of people who bought ours valve cover requested that it is removable. to be honest with you on this situation. picture is attached to show that is what and where we are coming from. you didn't purchase these from us..you bought from mvp.. we have still half of order that is not shipped out because we haven't gotten paid not because we haven't machined . all of them are machined.. to be exact. I have your valve cover and catch can and bolt kit, and valve cover sitting here.. not that any different then what you received as far as valve cover and coil cover. however, you did not receive your bolt kit because its here with set that was supports to go together.. however, I do not know what has mvp did or did not do on shipping end.. I have no clue and you will have to take up on mvp . anyway you bolt kit and breather are here waiting to get out of here as soon as mvp send us payment, on oil cap.. I will make video of it and show it to you , and ask your opinion. but every customer are different. you might think it is joke to make push on style oil filler cap.. I will also show you reason why we chose over threaded type.. factory style as well as aftermarket cap. you do not want to get nothing into your engine , and after see exactly truth about valve cover you might change your mind of your statement.. anyhow, I will correct the baffle situation asap. and about damaged on shipping, we document every product we sell and take every picture before it leaves my shop on my phone so I will forwards that to you Quote Link to comment Share on other sites More sharing options...
jazz1 Posted February 14, 2015 Share Posted February 14, 2015 They seem fair to resolve the situation . Quote Link to comment Share on other sites More sharing options...
Supraleeturbo Posted February 14, 2015 Share Posted February 14, 2015 OCD Works got back , looks like MVP messed up ; I dont know who or what products they sent me , Scott said my items are still in his Email FROM OCD Works First of all. Let me start saying i apologized for certain inncovinece that was cause. There is no denied on how baffle was sent that way you showing on picture.. We take full blame on those. Baffle that was supports to used in below the picture and also it was mistake by guy just started working here and i do take full responsibility of that.. However. You stated that those black glue cant be holding those baffle plate. Those are not glue and use same high temp oil resistant rtv that was just to just seal the baffle between the surface to baffle yet it is in there to keep from getting vibrate and rub off the from aluminum contacting each other so we can avoid any premature wear/shaving going in to motor. baffle was supports to be used with our laser cut piece which was supports to be put on.. however I had new guy started here and it is my fault that I was not present at the moment of quality control as well as shipping. I will like to send you correct baffle and you can replace with one that I will send. all of bolts are secure with red lock tight and it shouldn't be loose. if you want to have baffle without removable option then I would of welded on it to have less chance for anyone. but 90 % of people who bought ours valve cover requested that it is removable. to be honest with you on this situation. picture is attached to show that is what and where we are coming from. you didn't purchase these from us..you bought from mvp.. we have still half of order that is not shipped out because we haven't gotten paid not because we haven't machined . all of them are machined.. to be exact. I have your valve cover and catch can and bolt kit, and valve cover sitting here.. not that any different then what you received as far as valve cover and coil cover. however, you did not receive your bolt kit because its here with set that was supports to go together.. however, I do not know what has mvp did or did not do on shipping end.. I have no clue and you will have to take up on mvp . anyway you bolt kit and breather are here waiting to get out of here as soon as mvp send us payment, on oil cap.. I will make video of it and show it to you , and ask your opinion. but every customer are different. you might think it is joke to make push on style oil filler cap.. I will also show you reason why we chose over threaded type.. factory style as well as aftermarket cap. you do not want to get nothing into your engine , and after see exactly truth about valve cover you might change your mind of your statement.. anyhow, I will correct the baffle situation asap. and about damaged on shipping, we document every product we sell and take every picture before it leaves my shop on my phone so I will forwards that to you Bullshit get your money back mate, who said this new bloke what make the same mistake again? Quote Link to comment Share on other sites More sharing options...
Jellybean Posted February 14, 2015 Author Share Posted February 14, 2015 I am not installing baffles , they can give my new covers with the correct baffles installed or a refund; I want what I paid for , like I said I am fedup fixing other peoples mistakes I dont know what MVP sent me if Scott says "I have your valve cover and catch can and bolt kit, and valve cover sitting here" Quote Link to comment Share on other sites More sharing options...
Jellybean Posted February 14, 2015 Author Share Posted February 14, 2015 Baffles that should be on there , laser cut I created a shit storm on Supra forums with the Pics, Scott has loads of moderators and customers onto him about quality Quote Link to comment Share on other sites More sharing options...
Dnk Posted February 14, 2015 Share Posted February 14, 2015 I had a look on there website and outside machining on the front edge looks pretty crap to me being a CNC programmer/machinist Is that a large hex headed bolt in the photo ? looks like its been cut off with a hacksaw Quote Link to comment Share on other sites More sharing options...
Jellybean Posted February 14, 2015 Author Share Posted February 14, 2015 Is that a large hex headed bolt in the photo ? looks like its been cut off with a hacksaw I dont know what the hell it is and not sure why they would not just use a normal hex bolt , if they have used red loctite fastening the baffles to the valve covers; and they want me to swap out the baffles myself , I dont know how they expect me to get the existing ones off, I am not taking the risk damaging them Was onto paypal now , transactions made from the end of Jan are 180 days now , they said I need to go via my bank Quote Link to comment Share on other sites More sharing options...
Dnk Posted February 14, 2015 Share Posted February 14, 2015 Are yours like this ? I'm guessing these aren't finished looking at where i've arrowed to. There's also no chamfers on the edges, on the bolt holes etc Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.