ballsdeep Posted January 18, 2015 Share Posted January 18, 2015 Does the exhaust side breather fitting rotate? I bought a whifbitz stage 1 oil catch tank and I'd like the hose to run to the back of the engine, but it's currently facing forward and seems very tight! Fitting just above the ht leads. Quote Link to comment Share on other sites More sharing options...
MattP Posted January 18, 2015 Share Posted January 18, 2015 I don't think it does move tbh mate I'm sure people remove the cover and baffle and weld new attachments on if I remember correctly.. Quote Link to comment Share on other sites More sharing options...
ballsdeep Posted January 18, 2015 Author Share Posted January 18, 2015 that's not an option for me at this time! There must be another solution? Quote Link to comment Share on other sites More sharing options...
MattP Posted January 18, 2015 Share Posted January 18, 2015 that's not an option for me at this time! There must be another solution? I'm a bit out of my depth as I'm still TT so my knowledge is limited as to what is the normal for you single converts Quote Link to comment Share on other sites More sharing options...
ballsdeep Posted January 18, 2015 Author Share Posted January 18, 2015 Found one or two references to show it in a different position, so il try abit harder maybe it's the paint deceiving me? Hopefully it won't break? Quote Link to comment Share on other sites More sharing options...
Lee P Posted January 18, 2015 Share Posted January 18, 2015 They do move but sometimes they are tight, be careful you don't crush it while trying Quote Link to comment Share on other sites More sharing options...
ballsdeep Posted January 18, 2015 Author Share Posted January 18, 2015 Thanks for confirming that! Quote Link to comment Share on other sites More sharing options...
MattP Posted January 18, 2015 Share Posted January 18, 2015 Thanks for confirming that! Told you I'm S*** Quote Link to comment Share on other sites More sharing options...
Ian C Posted January 18, 2015 Share Posted January 18, 2015 Put something as near to the inner diameter as possible into it and use that to lever it around. A screwdriver or a socket extension bar, for example. Don't try pushing it from the outside or it'll deform Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.