sean2kuk Posted January 16, 2015 Share Posted January 16, 2015 Hello all A job I've put off for long enough and now I'd like to get it done.... My steering wheel is the ugly 4 spoke and I need a replacement..... Mine has cruise control.... Has anybody done this and who could guide me on what to do please I've seen a few nice wheels ....the one with the supra logo and a carbon fibre one..... Many thanks Link to comment Share on other sites More sharing options...
j_jza80 Posted January 16, 2015 Share Posted January 16, 2015 There's a guide to removing the 3 spoke facelift wheel on my build thread (see the link below). The carbon OEM wheel is based on this wheel, so it's the same method. Can't help with the 4 spoke wheel, but it shouldn't be hard to find info on removing it.remember to disconnect the battery for 10 mins prior to removing the wheel. Link to comment Share on other sites More sharing options...
sean2kuk Posted January 16, 2015 Author Share Posted January 16, 2015 All I know about it as u say remove battery and when u unwind the bolt under horn not to remove it all way and pull wheel towards u to release it.....the bolt still in place stops it from hitting u in nose..... It's where cruise thing that baffles me....I don't want to lose it....will I need a new boss if for instance I used a mr2 or celiac wheel? Link to comment Share on other sites More sharing options...
j_jza80 Posted January 16, 2015 Share Posted January 16, 2015 No, the MR2 and Celica wheels fit straight on. There are guides on the Internet to retrofitting the Toyota cruise stalk to other steering wheels IF you have thoroughly searched the forum, and can't find an answer, it would be hhelpful if you can do a 'how to', so that ther members don't have the same problem as you Link to comment Share on other sites More sharing options...
sean2kuk Posted January 16, 2015 Author Share Posted January 16, 2015 From a few threads on this subject I believe I need a facelift stalk thing that goes around the cruise switch and a.connecter for the airbag......... Was hoping somebody had done it with a guide and I could just copy it...... Link to comment Share on other sites More sharing options...
Kev.O Posted January 17, 2015 Share Posted January 17, 2015 I used a facelift stalk as the angle better suited the TRD wheel that I have, that was the only reason. Depending on the wheel I don't see any reason why you can't reuse the standard stalk. Link to comment Share on other sites More sharing options...
Littler Posted January 17, 2015 Share Posted January 17, 2015 This may help a little Link to comment Share on other sites More sharing options...
sean2kuk Posted January 17, 2015 Author Share Posted January 17, 2015 Thanks littler...was it difficult to get a facelift cruise control switch? Or did a Toyota dealer get that as well as the adaptor? Link to comment Share on other sites More sharing options...
Ric Posted January 17, 2015 Share Posted January 17, 2015 You need the cruise control boss i have: Link to comment Share on other sites More sharing options...
sean2kuk Posted January 17, 2015 Author Share Posted January 17, 2015 Oh where did u get that....never seen one before Link to comment Share on other sites More sharing options...
Ric Posted January 17, 2015 Share Posted January 17, 2015 They are on Ebay time to time: http://www.ebay.co.uk/itm/321166345362?clk_rvr_id=765373497057&rmvSB=true They are made by HKB, the link shows the model Toyota Supra JZA80 Hkb Boss Kit OT-156 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now