Jellybean Posted January 13, 2015 Share Posted January 13, 2015 Just taught I would ask before I go at it , I want to bolt the seat rail to the seat I presume I move the rail as far forward on the slider , bolt up the two bolts , move the rail as fair back to allow me to bolt up the front? The rail in certain positions prevent me getting to the bolt holes Of am I missing anything , just dont want to damage anything Link to comment Share on other sites More sharing options...
j_jza80 Posted January 13, 2015 Share Posted January 13, 2015 I haven't done it specifically with Bride rails, but all other seat rails work in that way Just make sure that before you fit the seats, you try moving the sliders to ensure nothing is getting caught. Link to comment Share on other sites More sharing options...
Jellybean Posted January 13, 2015 Author Share Posted January 13, 2015 Cool Thanks I installed seats on MX5 before , you had to be a bit ham fisted ; just wanted to check I was doing it right! Link to comment Share on other sites More sharing options...
MATT RR Posted January 13, 2015 Share Posted January 13, 2015 Yeh sounds right, that's how I did it. Worth noting the hand grab rail to slide was upside down on my bride rail, so when I bolted the seats on it was so close you couldn't pull it to slide the seat, if you have this problem just pop the hand grab rail off and flip it over so it slopes away from the seat Link to comment Share on other sites More sharing options...
Jellybean Posted January 13, 2015 Author Share Posted January 13, 2015 Thanks for the tip! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now