Jellybean Posted November 22, 2014 Share Posted November 22, 2014 (edited) Anybody have a pic of a breather setup , -12 pipes run to atmosphere , vent to out behind the diff I read is the best option? PHR / whifbitz stuff is crazy money for a little box Where do you get the -12 AN fittings to weld onto the Cam covers? Edited November 22, 2014 by Jellybean (see edit history) Link to comment Share on other sites More sharing options...
j_jza80 Posted November 22, 2014 Share Posted November 22, 2014 Can't you run it into a catch can? Running one out behind the car is potentially very dangerous to other drivers, and could possibly get you into a lot of trouble. Link to comment Share on other sites More sharing options...
Kaan W Posted November 22, 2014 Share Posted November 22, 2014 You can actually run the lines under the car and into a Coca-Cola bottle in the boot for cheap these days. As for fittings try jegs, summitracing, demon tweaks etc Link to comment Share on other sites More sharing options...
Jellybean Posted November 22, 2014 Author Share Posted November 22, 2014 Can't you run it into a catch can? Running one out behind the car is potentially very dangerous to other drivers, and could possibly get you into a lot of trouble. I am getting my cam covers polished so want to weld in the 12 AN fittings prior, what every members suggest , I just read run them out the back Just not paying for some fabricators holiday based on the prices of these Aluminium units Any advise welcome ! Link to comment Share on other sites More sharing options...
JamieP Posted November 22, 2014 Share Posted November 22, 2014 I'd run it out the back still, if the worst was to happen and the engine blows up, them little catch cans won't hold 5 litres of oil, it's still going to spray over the engine and possibly catch fire. I'd leave it as stock ( engine fails the oil will pump out the exhaust) or run the breather lines to the back of the car. Link to comment Share on other sites More sharing options...
Luxluc Posted November 22, 2014 Share Posted November 22, 2014 I'd run it out the back still, if the worst was to happen and the engine blows up, them little catch cans won't hold 5 litres of oil, it's still going to spray over the engine and possibly catch fire. I'd leave it as stock ( engine fails the oil will pump out the exhaust) or run the breather lines to the back of the car. +1 I have it that way. Link to comment Share on other sites More sharing options...
Benjy Posted November 22, 2014 Share Posted November 22, 2014 I'll be running mine out the back too shortly. Link to comment Share on other sites More sharing options...
Jellybean Posted November 22, 2014 Author Share Posted November 22, 2014 Is crank case pressure just marketing propaganda Link to comment Share on other sites More sharing options...
Scott Posted November 22, 2014 Share Posted November 22, 2014 I got all my stuff here.... http://www.speedflowshop.co.uk/ Link to comment Share on other sites More sharing options...
jay200bhp Posted November 22, 2014 Share Posted November 22, 2014 Fittings at earls performance or merlinmotorsports.... I have some -12 fittings and braided earls hose for sale in forsale section Link to comment Share on other sites More sharing options...
Clausz Posted November 23, 2014 Share Posted November 23, 2014 I'd run it out the back still, if the worst was to happen and the engine blows up, them little catch cans won't hold 5 litres of oil, it's still going to spray over the engine and possibly catch fire. I'd leave it as stock ( engine fails the oil will pump out the exhaust) or run the breather lines to the back of the car. +1, I do the same :-) Link to comment Share on other sites More sharing options...
Chris Wilson Posted November 24, 2014 Share Posted November 24, 2014 In over 40 years I have yet to see an engine failure where a lot of oil exits the top breather system. Thev recent Porsche fires have been due to con rods punching holes in the engine block. Running lines to the back of the car is utterly bizarre! Link to comment Share on other sites More sharing options...
dandan Posted November 24, 2014 Share Posted November 24, 2014 I've probably got some -12 weld-ons in aluminium plus unused proper Earl's fittings too that were leftover from me doing my own setup. Drop me a pm if you want me to see what I have...you can have them for cheaper than any UK suppliers you can find Link to comment Share on other sites More sharing options...
Jellybean Posted November 24, 2014 Author Share Posted November 24, 2014 In over 40 years I have yet to see an engine failure where a lot of oil exits the top breather system. Thev recent Porsche fires have been due to con rods punching holes in the engine block. Running lines to the back of the car is utterly bizarre! Thanks Chris , I will stick with OEM setup so Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now