Jump to content
The mkiv Supra Owners Club

The Guv’nor Build


Supraleeturbo

Recommended Posts

  • 2 months later...

Little up date but not for the car, I just got my self a new tool box to hold more stuff in it so dad can get his new supra in his gagrge aswell and thought I'd post the pics up here and yes I know I have an meguiars addiction but it's annoying running out of stuff and having to shoot to the shop to buy more half way through a detail, so I have 2 or 3 for stock :-)

 

image

image

image

image

Link to comment
Share on other sites

:D Your ok at the moment, that's not an addiction, yet..... :)

 

Agree its not a addiction yet lol. Wait until you start buying all the different waxes for different occasions. Also you need a wheel woolies for the wheels :D.

 

If you don't mind me asking how much did that toolbox cost, Ive been thinking about getting one too.

Link to comment
Share on other sites

Cool mate.

 

You need a test car for all the polishing and waxing stuff? :D

 

Bring her over mate lol but I'm no where near as pro as stonkin ;-)

 

- - - Updated - - -

 

:D Your ok at the moment, that's not an addiction, yet..... :)

 

I would love to see your collection ;-)

 

- - - Updated - - -

 

Agree its not a addiction yet lol. Wait until you start buying all the different waxes for different occasions. Also you need a wheel woolies for the wheels :D.

 

If you don't mind me asking how much did that toolbox cost, Ive been thinking about getting one too.

 

Pm sent

Link to comment
Share on other sites

  • 3 weeks later...

so im at a bit of a dilemma i do love my advans rs wheels but after seeing dads new wheels its making want to go dished and wider, now i don't normally like following the crowd but im thinking,

 

ccw lm20

 

work emotions d9r

 

work meister s1 3 piece

 

work emotions CR-2p

 

i will be getting the advans fully refurbished and new tyers on the rears, so my question is what price would i get for them, there 9j et 35 and 10j et 35 all wrapped in mitchelin tyres

 

cheers

Link to comment
Share on other sites

so im at a bit of a dilemma i do love my advans rs wheels but after seeing dads new wheels its making want to go dished and wider, now i don't normally like following the crowd but im thinking,

 

ccw lm20

 

work emotions d9r

 

work meister s1 3 piece

 

work emotions CR-2p

 

i will be getting the advans fully refurbished and new tyers on the rears, so my question is what price would i get for them, there 9j et 35 and 10j et 35 all wrapped in mitchelin tyres

 

cheers

 

The Advans suit your car well mate so will be a tricky decision! I got to admit I do like the look of deep dished wheels on a supra and that's why I went for the Blizt technospeed Z1's on my motor, the CWW or the Work Meisters would be my choice out of that list.

 

Not really sure what price I'd put on your Advans once refurbed and new tyres on, I doubt you'd get the money back you put into the work to get this done! But I could be wrong :)

Link to comment
Share on other sites

Dont get them re-furbed if your going to sell, just dead money.

 

Depends on the look you want CCW shout serious street car, work meister shout show car.

 

Two of my favourite wheels, work of warning a wheel like the CCW will take allot more cleaning to keep on top off compared to your current setup.

 

 

Music to my ears any excuse for more cleaning lol

Link to comment
Share on other sites

The Advans suit your car well mate so will be a tricky decision! I got to admit I do like the look of deep dished wheels on a supra and that's why I went for the Blizt technospeed Z1's on my motor, the CWW or the Work Meisters would be my choice out of that list.

 

Not really sure what price I'd put on your Advans once refurbed and new tyres on, I doubt you'd get the money back you put into the work to get this done! But I could be wrong :)

 

 

Thank you mate just want something that doesn't get lost with the black paint work plus I love the usa look may go 17 rear so I can go for a bigger tyre like Stevem

Link to comment
Share on other sites

I was leaning towards the D9R myself in bronze, although if money was no object then I'd probably choose the CCW's or Meister S1 3 piece :) I've had a couple of sets of polished wheels in my time and they are hard work to keep clean! I'd personally recommend mothers metal polish and poorboys wheel sealant if you do go polished.

Link to comment
Share on other sites

Just dont go from a decent wheel to some knock off 'lookie likie' cast wheel to get the style and save a few $$. it a proper car so do it properly :thumbs:

 

Excatly that mate hence why iv gone for the wheels said, I never scrimp on wheels or tyre as there what keep you on the road

 

- - - Updated - - -

 

I was leaning towards the D9R myself in bronze, although if money was no object then I'd probably choose the CCW's or Meister S1 3 piece :) I've had a couple of sets of polished wheels in my time and they are hard work to keep clean! I'd personally recommend mothers metal polish and poorboys wheel sealant if you do go polished.

 

Definitely will be getting a good coating of a chosen wheel sealant

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.