JackyBoi Posted November 3, 2014 Share Posted November 3, 2014 I'm getting some titanium decat pipes tomorrow with the restrictor plate and was just wondering if anyone knows of a tutorial/how-to video which would clearly show me how it's done properly? Been looking through the forum for ages and can't find one  Cheers Quote Link to comment Share on other sites More sharing options...
tony tt Posted November 3, 2014 Share Posted November 3, 2014 Just unbolt the first and second cat and put the decats in their place. Restrictor ring in the middle of the two decat pipes. The top bolts on the first decat can be tricky though you may need to heat them to get them off. Quote Link to comment Share on other sites More sharing options...
JackyBoi Posted November 3, 2014 Author Share Posted November 3, 2014 Just unbolt the first and second cat and put the decats in their place. Restrictor ring in the middle of the two decat pipes. The top bolts on the first decat can be tricky though you may need to heat them to get them off. Is it really that straight forward? And when you say the ring goes in the middle do you mean side-by-side with the 1st decat 2nd decat or between two bits of pipe? Cheers buddy Quote Link to comment Share on other sites More sharing options...
Chris Bailey Posted November 3, 2014 Share Posted November 3, 2014 First cat can be a pig to get off without access to a ramp. Second cat should be okay Quote Link to comment Share on other sites More sharing options...
tony tt Posted November 3, 2014 Share Posted November 3, 2014 Yeah it's pretty straight forward. 5 bolts in total if I remember rightly. When you bolt the the 1st and 2nd decat together put the ring inbetween them and tighten up. You will notice the word decat in blue? Click on that and it will tell you all about it buddy. Quote Link to comment Share on other sites More sharing options...
Nic Posted November 3, 2014 Share Posted November 3, 2014 Remove these (1st and 2nd cat) and replace with decat pipes, restrictor ring in the middle. Quote Link to comment Share on other sites More sharing options...
JackyBoi Posted November 4, 2014 Author Share Posted November 4, 2014 Remove these (1st and 2nd cat) and replace with decat pipes, restrictor ring in the middle. http://mkiv.com/techarticles/downpipe_pics/stock_cats/mvc-006s.jpg So is this essentially where the restrictor ring will go?  Thanks guys this is all very helpful information Quote Link to comment Share on other sites More sharing options...
The Raven Posted November 4, 2014 Share Posted November 4, 2014 Yup. Â Have fun with those top bolts Quote Link to comment Share on other sites More sharing options...
safcdixon Posted November 4, 2014 Share Posted November 4, 2014 Get a plumbers style butane torch to heat the bolts it makes them 100% easier to remove Quote Link to comment Share on other sites More sharing options...
supra_ufo Posted November 4, 2014 Share Posted November 4, 2014 Get a plumbers style butane torch to heat the bolts it makes them 100% easier to remove what marc said Quote Link to comment Share on other sites More sharing options...
Marcus GTE Posted November 4, 2014 Share Posted November 4, 2014 You will need a 12" extension for your socket set to reach the top 3 bolts. Two of them you can get to ok but with one of them you will need a knuckle attachment to get it at an angle. I soaked the 3 bolts the night before in wd30 and they came off ok with patience, but I did round one off putting it back on so be careful. Quote Link to comment Share on other sites More sharing options...
David P Posted November 4, 2014 Share Posted November 4, 2014 I soaked the 3 bolts the night before in wd30Â That's an old recipe. Quote Link to comment Share on other sites More sharing options...
Wez Posted November 4, 2014 Share Posted November 4, 2014 Where did you get the titanium decat pipes from? Quote Link to comment Share on other sites More sharing options...
Dnk Posted November 4, 2014 Share Posted November 4, 2014 Penetrating fluid is what you need and a small blow torch, oh and a ramp to make life even easier Quote Link to comment Share on other sites More sharing options...
JackyBoi Posted November 4, 2014 Author Share Posted November 4, 2014 Thanks guys all very useful information used a butane blowtorch on the bolts they came off a dream, no rust or corrosion at all Quote Link to comment Share on other sites More sharing options...
JackyBoi Posted November 4, 2014 Author Share Posted November 4, 2014 Where did you get the titanium decat pipes from? Whifbitz Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.