trebor69 Posted October 22, 2014 Share Posted October 22, 2014 The 1jz I now have in my car has quite a dent in the bottom of the sump (its worse than flat, like domed) yet the one on the 2jz I took out is unmarked, however the 2jz is now sat on the ground and I don't have a hoist to weigh up the sumps to see if they are the same, does anybody know for sure if they are interchangeable....just the very bottom pan? Thanks. Link to comment Share on other sites More sharing options...
garethr Posted October 22, 2014 Share Posted October 22, 2014 It's the same part number (12102-46030) for the Soarer/Supra 1JZ-GTE, the Supra 2JZ-GTE, and the Soarer/Supra 2JZ_GE. Link to comment Share on other sites More sharing options...
trebor69 Posted October 23, 2014 Author Share Posted October 23, 2014 Cool, Thanks pal. It's the same part number (12102-46030) for the Soarer/Supra 1JZ-GTE, the Supra 2JZ-GTE, and the Soarer/Supra 2JZ_GE. Link to comment Share on other sites More sharing options...
Reyft Posted October 24, 2014 Share Posted October 24, 2014 Do you owner of 2jz gte, how long takes you to take off oil sump? i have to do on my ;(( Link to comment Share on other sites More sharing options...
trebor69 Posted October 24, 2014 Author Share Posted October 24, 2014 I took one off the N/A engine today that is balanced on ramps and it took about half hour, will be easier doing the one thats on the car, doing this tomorrow. Both bottom sumps for the N/A and the GTE are the same part number so are the same sump. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now