jazz1 Posted September 30, 2014 Share Posted September 30, 2014 Ok I just need some advice before i purchase one, ideally i want the majestic kit but waiting a reply if they can fabricate the Smaller diff cover. I beleive the supra only has two types of Diff? Large and small case? My supra being facelift has the smaller case A03B, Mpc contacted me saying they sell both covers. So I'm true to beleive the one I need to order is in the link below: Both type: http://www.mpcmotorsport.com/differential.html I order this one? http://www.mpcmotorsport.com/automatic-differential-cover.html Quote Link to comment Share on other sites More sharing options...
j_jza80 Posted September 30, 2014 Share Posted September 30, 2014 I would consider what you do here carefully. If there's a chance you want to upgrade to a large case diff in future, this will be wasted. Quote Link to comment Share on other sites More sharing options...
jazz1 Posted September 30, 2014 Author Share Posted September 30, 2014 I would consider what you do here carefully. If there's a chance you want to upgrade to a large case diff in future, this will be wasted. That's not an issue il invest in a larger case later in life when I find a decent one, but for now I'm keeping the smaller case etc i know what I have decided for my goals on the supra . Anyways as above would I be ordering the correct one? Quote Link to comment Share on other sites More sharing options...
SPG Posted September 30, 2014 Share Posted September 30, 2014 As above and also double check the diff code as some facelifts have v161 mated to a B03b from the factory. Quote Link to comment Share on other sites More sharing options...
SPG Posted September 30, 2014 Share Posted September 30, 2014 Have you been on OCD Works website? They also do nice diff plates fully CNC'd from billet Quote Link to comment Share on other sites More sharing options...
jazz1 Posted September 30, 2014 Author Share Posted September 30, 2014 (edited) As above and also double check the diff code as some facelifts have v161 mated to a B03b from the factory. Where would I check the code? My plate states: V160 A03B? - - - Updated - - - Have you been on OCD Works website? They also do nice diff plates fully CNC'd from billet Link please as I can't seem to see them selling Diff plates ? http://www.ocdworks.com/?page_id=13 Edited September 30, 2014 by jazz1 (see edit history) Quote Link to comment Share on other sites More sharing options...
bignum Posted September 30, 2014 Share Posted September 30, 2014 Looks like a total waste of cash to me, i suppose the mot guy will be impressed when he jacks the car up on mot day? Quote Link to comment Share on other sites More sharing options...
JamieP Posted September 30, 2014 Share Posted September 30, 2014 If you like drag racing they are well worth fitting, I wouldn't bother fitting one to a small case diff though tbh. Quote Link to comment Share on other sites More sharing options...
jazz1 Posted September 30, 2014 Author Share Posted September 30, 2014 (edited) If you like drag racing they are well worth fitting, I wouldn't bother fitting one to a small case diff though tbh. Thanks Jamie but for now I may just fit one for peace of mind, although I will be investing in large case diff future for emergency like you always have done . - - - Updated - - - Looks like a total waste of cash to me, i suppose the mot guy will be impressed when he jacks the car up on mot day? You running a small case with TRD internals? Edited September 30, 2014 by jazz1 (see edit history) Quote Link to comment Share on other sites More sharing options...
bignum Posted September 30, 2014 Share Posted September 30, 2014 Thanks Jamie but for now I may just fit one for peace of mind, although I will be investing in large case diff for emergency like you always have done . - - - Updated - - - You running a small case with TRD internals? Similar, small case with tomie internals. Quote Link to comment Share on other sites More sharing options...
jazz1 Posted September 30, 2014 Author Share Posted September 30, 2014 Similar, small case with tomie internals. Nice I take it you track day? Quote Link to comment Share on other sites More sharing options...
bignum Posted October 1, 2014 Share Posted October 1, 2014 Nice I take it you track day? Thats mainly what the car is used for these days yes. Quote Link to comment Share on other sites More sharing options...
David P Posted October 1, 2014 Share Posted October 1, 2014 Looks like a total waste of cash to me, i suppose the mot guy will be impressed when he jacks the car up on mot day? Quote Link to comment Share on other sites More sharing options...
Brazil Posted October 1, 2014 Share Posted October 1, 2014 My small case diff only last the run in new engine mapping, just food for thought..! lol I have a Gilken tripple plate clutch which is incredibly grippy so the diff gets totally abused..! Quote Link to comment Share on other sites More sharing options...
Dnk Posted October 1, 2014 Share Posted October 1, 2014 My small case diff only last the run in new engine mapping, just food for thought..! lol I have a Gilken tripple plate clutch which is incredibly grippy so the diff gets totally abused..! Not really surprising with no oil in it mate Quote Link to comment Share on other sites More sharing options...
Brazil Posted October 1, 2014 Share Posted October 1, 2014 Not really surprising with no oil in it mate Yeah its a pain in the ass, I should be out enjoying the car instead I am organizing a toe truck; on the positive side I will get a big case diff with new bearings and bushes and Gilken LSD. Quote Link to comment Share on other sites More sharing options...
Dnk Posted October 1, 2014 Share Posted October 1, 2014 Nearly £400 for a bit of plate with a few holes in, i bet that takes all of 1 hour to machine Quote Link to comment Share on other sites More sharing options...
Nodalmighty Posted October 1, 2014 Share Posted October 1, 2014 Nearly £400 for a bit of plate with a few holes in, i bet that takes all of 1 hour to machine It's what you buy the Supra that has everything .......... Quote Link to comment Share on other sites More sharing options...
Dnk Posted October 1, 2014 Share Posted October 1, 2014 It's what you buy the Supra that has everything .......... I could have that cover made in an hour, its nothing special as far as cnc machining is concerned, they should call themselves DT engineering and wear a mask Quote Link to comment Share on other sites More sharing options...
JamieP Posted October 1, 2014 Share Posted October 1, 2014 I could have that cover made in an hour, its nothing special as far as cnc machining is concerned, they should call themselves DT engineering and wear a mask How much dude? I'd buy one if you can make them at a good price? Quote Link to comment Share on other sites More sharing options...
Nodalmighty Posted October 1, 2014 Share Posted October 1, 2014 (edited) I could have that cover made in an hour, its nothing special as far as cnc machining is concerned, they should call themselves DT engineering and wear a mask snigger What the hell are hocky sticks (other than the obvious) ? http://www.hockeystation.co.uk/graf-supra-g45-hockey-stick-sr/p366 ????????????????? Edited October 1, 2014 by Nodalmighty (see edit history) Quote Link to comment Share on other sites More sharing options...
David P Posted October 1, 2014 Share Posted October 1, 2014 (edited) I could have that cover made in an hour, its nothing special as far as cnc machining is concerned, they should call themselves DT engineering and wear a mask I bet Dnk would even remember to include the cooling fins as on the OE large diff cover plate. Group buy coming up. Edited October 1, 2014 by David P (see edit history) Quote Link to comment Share on other sites More sharing options...
Brazil Posted October 1, 2014 Share Posted October 1, 2014 How much dude? I'd buy one if you can make them at a good price? +1 Quote Link to comment Share on other sites More sharing options...
Dnk Posted October 2, 2014 Share Posted October 2, 2014 Workshop is flat out i'm afraid so no chance of doing any of these for some time. I doubt it would be worth us getting involved with to be honest but i will speak to my brother and see what he thinks. Quote Link to comment Share on other sites More sharing options...
Dnk Posted October 2, 2014 Share Posted October 2, 2014 (edited) I bet Dnk would even remember to include the cooling fins as on the OE large diff cover plate. Group buy coming up. Do you have a photo of one ? a photo of the inside of the cover would be a help to I'm guessing this is PHR's version Edited October 2, 2014 by Dnk (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.