mattdavies Posted August 18, 2014 Share Posted August 18, 2014 I would like to smooth the front of my Supra and have noticed that a few people have done it. I am looking to just cover the holes for the number plate holder. What I want to know is: How you have done it What materials you have used Have you had any issues with it cracking Quote Link to comment Share on other sites More sharing options...
ripped_fear Posted August 18, 2014 Share Posted August 18, 2014 Mine was done when it was re-sprayed on the front end. Iirc it has plastic moulded behind the bumper holes, then skimmed across the front. No cracking 2 years down the line however if you look REALLY close one has sunk a tiny bit. Barely noticeable. Something I will be having rectified next year. The main thing we had was making sure no air bubbles where in the filler, required an air line and some special type of filler stuff. Two words DO IT! Quote Link to comment Share on other sites More sharing options...
mattdavies Posted August 18, 2014 Author Share Posted August 18, 2014 Mine was done when it was re-sprayed on the front end. Iirc it has plastic moulded behind the bumper holes, then skimmed across the front. No cracking 2 years down the line however if you look REALLY close one has sunk a tiny bit. Barely noticeable. Something I will be having rectified next year. Two words DO IT! Or sell your to me Quote Link to comment Share on other sites More sharing options...
ripped_fear Posted August 18, 2014 Share Posted August 18, 2014 Nice try Quote Link to comment Share on other sites More sharing options...
supra_ufo Posted August 18, 2014 Share Posted August 18, 2014 mine has parking sensors, I am in two minds about filling them up Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.