Jellybean Posted August 15, 2014 Author Share Posted August 15, 2014 Tip for refitting the window , lightly tighten the three bolts , up and down the window so it will align itself then tighten up the bolts Link to comment Share on other sites More sharing options...
wile e coyote Posted August 15, 2014 Share Posted August 15, 2014 Glad you all sorted Link to comment Share on other sites More sharing options...
Jellybean Posted August 15, 2014 Author Share Posted August 15, 2014 Glad you all sorted Thanks dude , car is safe now Link to comment Share on other sites More sharing options...
Jellybean Posted August 20, 2014 Author Share Posted August 20, 2014 Quick one If I put the window up and the door is open the Glass sits too high and hits the Door Frame by 2-3mm anyway I can adjust it so the window will stop a few mm short? Bump stop or try adjust the screws that hold the glass in place? Link to comment Share on other sites More sharing options...
Slam Posted August 20, 2014 Share Posted August 20, 2014 Quick one If I put the window up and the door is open the Glass sits too high and hits the Door Frame by 2-3mm anyway I can adjust it so the window will stop a few mm short? Bump stop or try adjust the screws that hold the glass in place? I would say screws that hold the glass Link to comment Share on other sites More sharing options...
DodgyRog Posted August 20, 2014 Share Posted August 20, 2014 There are bump stops in the door, they make contact with the round rubbery bits on the bottom of the window Link to comment Share on other sites More sharing options...
DodgyRog Posted August 20, 2014 Share Posted August 20, 2014 Let us know how you get on as my bro got one 2 weeks ago from Steve manly Toyota and was over £100 and looked the same ! Malc, did you not get forum discount, Steve Manley sold it to me for about £85 delivered a few days before you Link to comment Share on other sites More sharing options...
wile e coyote Posted August 20, 2014 Share Posted August 20, 2014 He prob told me wrong cost Prob after 7pm lol Link to comment Share on other sites More sharing options...
Jellybean Posted August 20, 2014 Author Share Posted August 20, 2014 (edited) There are bump stops in the door, they make contact with the round rubbery bits on the bottom of the window Can you adjust them, hopefully you can? Just checked there, fully closed, when you open the door it catches the Window frame, and again when you try to close the door , just afraid the glass may shatter I need to fully close the window and toggle the switch for a second to lower the window a 1-2mm to open close the door , not very practical and bloody annoying Can only find these threads but I think I need a pic of where to adjust the bump stop http://www.mkivsupra.net/vbb/archive/index.php/t-134699.html http://www.supraforums.com/forum/archive/index.php/t-354586.html Edited August 20, 2014 by Jellybean (see edit history) Link to comment Share on other sites More sharing options...
DodgyRog Posted August 21, 2014 Share Posted August 21, 2014 Can you adjust them, hopefully you can? Just checked there, fully closed, when you open the door it catches the Window frame, and again when you try to close the door , just afraid the glass may shatter I need to fully close the window and toggle the switch for a second to lower the window a 1-2mm to open close the door , not very practical and bloody annoying Can only find these threads but I think I need a pic of where to adjust the bump stop http://www.mkivsupra.net/vbb/archive/index.php/t-134699.html http://www.supraforums.com/forum/archive/index.php/t-354586.html Yeah they can be adjusted. I don't have a pic, but I just put the window up with the Door Card etc off and if you look up into the inside of the door you can see the stops against the the rubbery bits on the bottom of the window glass Hope that helps Link to comment Share on other sites More sharing options...
Jellybean Posted August 21, 2014 Author Share Posted August 21, 2014 Yeah they can be adjusted. I don't have a pic, but I just put the window up with the Door Card etc off and if you look up into the inside of the door you can see the stops against the the rubbery bits on the bottom of the window glass Hope that helps thanks , Probably one of those things is hard to explain ; I will get photos if I figure out how to do it Link to comment Share on other sites More sharing options...
Jellybean Posted August 25, 2014 Author Share Posted August 25, 2014 Pics of the Window Bump stops , you can adjust , two 10mm Bolts , from what I remember Rear glass Front Glass Link to comment Share on other sites More sharing options...
Samsar Posted October 18, 2014 Share Posted October 18, 2014 Can't believe this has just happened to my drivers side window grrrrr!! This is what's broken What is it I'm going to need? I've had a look at the passenger side and this is how it's supposed to look( I think). Link to comment Share on other sites More sharing options...
DodgyRog Posted October 18, 2014 Share Posted October 18, 2014 Can't believe this has just happened to my drivers side window grrrrr!! This is what's broken[ATTACH]192967[/ATTACH] What is it I'm going to need? I've had a look at the passenger side and this is how it's supposed to look( I think).[ATTACH]192968[/ATTACH] You will need a Driver side Window Mechanism (without Motor) Steve Manley got me one, it was about £75-£80 to my door From memory it looks like your passenger side is about to go as well Link to comment Share on other sites More sharing options...
Samsar Posted October 18, 2014 Share Posted October 18, 2014 Cheers Rog. The motor has had it too. Link to comment Share on other sites More sharing options...
DodgyRog Posted October 18, 2014 Share Posted October 18, 2014 Why do you think the motor is dead Link to comment Share on other sites More sharing options...
Samsar Posted October 18, 2014 Share Posted October 18, 2014 Why do you think the motor is dead The spool inside that the wires wrap around has broken up. I'm ringing Keron on Monday as he's got all the bits I need in stock. Link to comment Share on other sites More sharing options...
DodgyRog Posted October 18, 2014 Share Posted October 18, 2014 You get the spool with the mechanism from Mr.T Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now