Jellybean Posted August 14, 2014 Share Posted August 14, 2014 Hey Was just paying for parking , tried to put the window back up and it wouldnt go , then it started to drop into the door Sounds like the motor is still working though, window popped off the regulator ? easy job for the DIY Car is in a public car park now with no drivers window Link to comment Share on other sites More sharing options...
David P Posted August 14, 2014 Share Posted August 14, 2014 Shane is an expert with this Supranundrum. Link to comment Share on other sites More sharing options...
Iky Posted August 14, 2014 Share Posted August 14, 2014 Hey Was just paying for parking , tried to put the window back up and it wouldnt go , then it started to drop into the door Sounds like the motor is still working though, window popped off the regulator ? easy job for the DIY Car is in a public car park now with no drivers window I was in the exact same scenario about two months ago. The cable frayed and jammed inside the little coggy thing. Needed a new window regulator. Keron keeps new ones in stock usually. False economy getting a used one as it will just fail again soon. Is there a wall you can park up against and get out the passenger side? Link to comment Share on other sites More sharing options...
Jellybean Posted August 14, 2014 Author Share Posted August 14, 2014 I was in the exact same scenario about two months ago. The cable frayed and jammed inside the little coggy thing. Needed a new window regulator. Keron keeps new ones in stock usually. False economy getting a used one as it will just fail again soon. Is there a wall you can park up against and get out the passenger side? I am afraid not, just have the car cover over it , ah crap , need it the weekend Link to comment Share on other sites More sharing options...
BK1 Posted August 14, 2014 Share Posted August 14, 2014 I had the same thing in my gen 6 Celica, cable from motor wasn't replaceable so I got a whole unit from a scrapyard for a tenner and fitted it in less than an hour Link to comment Share on other sites More sharing options...
Jellybean Posted August 14, 2014 Author Share Posted August 14, 2014 So you cannot just buy a cable I presume, due to the age of the car i doubt it just popped off will take the door card off tonight Link to comment Share on other sites More sharing options...
Jellybean Posted August 14, 2014 Author Share Posted August 14, 2014 Took off the door card, window is buried in there, I tried to pull up the window only will go third of the way, when you try to use the button it sounds like the cable is splintering in the lower section if the door, will strip out the motor tomorrow but I reckon new cable mechanism Link to comment Share on other sites More sharing options...
Jellybean Posted August 14, 2014 Author Share Posted August 14, 2014 Link to comment Share on other sites More sharing options...
Jellybean Posted August 14, 2014 Author Share Posted August 14, 2014 Had to remove that plastic , what's that for ? Link to comment Share on other sites More sharing options...
David P Posted August 14, 2014 Share Posted August 14, 2014 (edited) That's not "removed", that's "destroyed", the goo it's stuck on with is re-gooable. It's there to prevent the door cards curling up from the damp. Edited August 14, 2014 by David P (see edit history) Link to comment Share on other sites More sharing options...
Jellybean Posted August 14, 2014 Author Share Posted August 14, 2014 That's not "removed", it's "destroyed", the goo it's stuck on with is re-gooable. I can get more plastic if it is needed but I was going to put in the 17.5 cm speakers so seen people remove it Link to comment Share on other sites More sharing options...
Graham1984 Posted August 14, 2014 Share Posted August 14, 2014 You will probably find the tiny bit of plastic at the end of the regulator has snapped, I have had two drivers side ones go. Link to comment Share on other sites More sharing options...
Jellybean Posted August 14, 2014 Author Share Posted August 14, 2014 You will probably find the tiny bit of plastic at the end of the regulator has snapped, I have had two drivers side ones go. Thanks! Will start pricing up a new mechanism Link to comment Share on other sites More sharing options...
Graham1984 Posted August 14, 2014 Share Posted August 14, 2014 Thanks! Will start pricing up a new mechanism Normally about £40 2nd hand iirc. Link to comment Share on other sites More sharing options...
Jellybean Posted August 14, 2014 Author Share Posted August 14, 2014 Will get new , cars are too old now for second hand mechanical parts Link to comment Share on other sites More sharing options...
wile e coyote Posted August 15, 2014 Share Posted August 15, 2014 Bro(slam) needed one the other day The motor eats the cable so can't get it on its own You need a new regulator it also comes with the drum that sits in the motor Easy to replace but when you get new one do not cut the cable ties holding cover over wires on drum Leave it till ready then you need to place the drum/ regulator onto your old motor Will all makes sense when you get new one Link to comment Share on other sites More sharing options...
Shane Posted August 15, 2014 Share Posted August 15, 2014 Had one go on every supra I have owned now. People want too much for second hand ones imo, luckily the last time I needed one a member sold me one at a sensible price. Next time tho, I will most likely buy new. I think Keron stocks new ones by the way. But if you remove the whole regulator, you can use a simple ratchet strap to get your car secured and usable while you sort out the replacement part. One end of the strap secures at the top of the door, the strap then passes under the glass and through the slot and then lower down on the door. You can then just ratchet the glass up to the correct height. Link to comment Share on other sites More sharing options...
Jellybean Posted August 15, 2014 Author Share Posted August 15, 2014 Cool , thanks for the heads up ! Just ordered one off Toyota Ireland this morning , will be here by 1pm 65gbp + Vat not too bad Link to comment Share on other sites More sharing options...
Elmo Posted August 15, 2014 Share Posted August 15, 2014 Mine went a few years ago, got a 2nd hand one and it's still working. The problem I had (and still have) is getting the window to line back up exactly with the rubber seal, resulting in wind noise on the motorway, despite lots of faffing, I never managed to get it right. Link to comment Share on other sites More sharing options...
wile e coyote Posted August 15, 2014 Share Posted August 15, 2014 there is lots of adjustments on it on door and where the regulator bolts onto glass Link to comment Share on other sites More sharing options...
Graham1984 Posted August 15, 2014 Share Posted August 15, 2014 Mine went a few years ago, got a 2nd hand one and it's still working. The problem I had (and still have) is getting the window to line back up exactly with the rubber seal, resulting in wind noise on the motorway, despite lots of faffing, I never managed to get it right. It drives you nuts doesn't it Link to comment Share on other sites More sharing options...
Elmo Posted August 15, 2014 Share Posted August 15, 2014 It drives you nuts doesn't it Nuts ain't the word, in the end just thought screw it and now I just turn the stereo up! Link to comment Share on other sites More sharing options...
Jellybean Posted August 15, 2014 Author Share Posted August 15, 2014 Just got the new part, looks like a revised model compared to what is on there , the cable loops through the two pulleys as opposed to having the cable in the top pulley with a lead stopper on the end of the cable Asked the parts manager and he said it was revised back in 06 , they use to retail for 200 euro Link to comment Share on other sites More sharing options...
wile e coyote Posted August 15, 2014 Share Posted August 15, 2014 Let us know how you get on as my bro got one 2 weeks ago from Steve manly Toyota and was over £100 and looked the same ! Link to comment Share on other sites More sharing options...
Jellybean Posted August 15, 2014 Author Share Posted August 15, 2014 All fitted , the plastic roller that sits into the motor chewed the threads on the roller causing the cable to get tangled Part number I got was 69801-14111 Was 85 euro Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now