DannoSupra Posted August 6, 2014 Share Posted August 6, 2014 Any Syvecs know it alls on here that's willing to give me a quick hand/explaination. just some help with Pin's and making connection to the ecu Drop us a PM and i shall explain my problem Poor Lee at SRD, i've been txting him back and forth for a while, i'm sure i'm getting on his nerves Many Thanks Dan Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted August 7, 2014 Share Posted August 7, 2014 Just ask here, there are several owners who know the system well. Helps anyone searching for info in the future then. Quote Link to comment Share on other sites More sharing options...
Wez Posted August 7, 2014 Share Posted August 7, 2014 Just ask here, there are several owners who know the system well. Helps anyone searching for info in the future then. Quote Link to comment Share on other sites More sharing options...
Kaan W Posted August 7, 2014 Share Posted August 7, 2014 Maybe explain the problem your having so we can help you Quote Link to comment Share on other sites More sharing options...
DannoSupra Posted August 7, 2014 Author Share Posted August 7, 2014 Lee has writena map to my spec and my pinouts, hes assigned the pins also. When i load the map, it comes up that its loaded but ecu connection light is amber/yellow and not in sync 1 thing i have noticed is that 45,46, 67 and 68 havnt got pins in them, do these have to be earthed? Ive bought the mini pins to add wiring but they will not drop in place in the connector Ive got JamiePs old loom and ecu off the 'Black Beast' Thanks guys Quote Link to comment Share on other sites More sharing options...
Wez Posted August 7, 2014 Share Posted August 7, 2014 Not in Sync means the calibration running on the ECU doesnt match what is in sCal. When you load up the new calibration in sCal are you doing program to send it to the ECU? Quote Link to comment Share on other sites More sharing options...
DannoSupra Posted August 7, 2014 Author Share Posted August 7, 2014 I load the cal to the ecu then go to device then program if thats what you mean, then yeah Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.