evinX Posted July 31, 2014 Share Posted July 31, 2014 Hi all, after some new alloys..I have standard shocks + springs and the rear arches have been rolled. Sizes of the alloys I would like are, Fronts :- 18" 9.5" 5x114mm ET12 Rears :- 18" 10" 5x114mm ET12 And what tyres could I go with and what would you recommend. Thank you, Kev:) Quote Link to comment Share on other sites More sharing options...
kitch79 Posted July 31, 2014 Share Posted July 31, 2014 (edited) I'd say no. The offset and width will make the rim come out 31.7mm more than mine at the front (8.5" ET 31) and 25.35mm more at the rear (9.5" ET31) The arse end of mine. Unfortunately this is the best Pic I got of the front, it's at a slight angle but you can get the picture, adding 32mm ain't going to fit :-( Edited July 31, 2014 by kitch79 (see edit history) Quote Link to comment Share on other sites More sharing options...
Glanza_Mike Posted July 31, 2014 Share Posted July 31, 2014 To get those to fit you would have to roll and pull both front and rear and also run stretched tyres more than likely. I tried a set on the front the other day, 9.5" front +15 they probably stuck out around 30mm on stock arches. Have a pic if u want. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.