Bluudy Posted July 29, 2014 Share Posted July 29, 2014 I know its proberly been asked 1000 times but im only finding old threads. whats needed to convert to 5 speed manual. ? Is the price tag as high as a 6 speed? Thanks Link to comment Share on other sites More sharing options...
Guest Roger NE Posted July 29, 2014 Share Posted July 29, 2014 (edited) No, very much cheaper, as the N/A gearboxes are often changed if people turbocharge their engine. You need: W58 gearbox with bellhousing, clutch fork and slave cylinder (and Flywheel and 8 flywheel bolts Complete Clutch kit with pilot bearing and release bearing (best get all this new if you can afford it) Clutch and brake pedals Clutch Master Cylinder Clutch hydraulic line Manual Propshaft You may also need the gearbox support cross member if it's different Think that's mainly it . . . you could get the lot from one scrap car (I'd be offering ~£400 in total) You also need to do a bit of wiring modification, to short out the wires to the auto start switch Edited July 29, 2014 by Roger NE (see edit history) Link to comment Share on other sites More sharing options...
trebor69 Posted July 29, 2014 Share Posted July 29, 2014 Don't you need to have a new transmission tunnel welded in too to fit the manual box ? Link to comment Share on other sites More sharing options...
Fitz Posted July 29, 2014 Share Posted July 29, 2014 Don't you need to have a new transmission tunnel welded in too to fit the manual box ? Correct Link to comment Share on other sites More sharing options...
natony Posted July 29, 2014 Share Posted July 29, 2014 Don't you need to have a new transmission tunnel welded in too to fit the manual box ? No you don't really have to with W58, you can just :cough: persuade the tunnel to move a little. Link to comment Share on other sites More sharing options...
Fitz Posted July 29, 2014 Share Posted July 29, 2014 No you don't really have to with W58, you can just :cough: persuade the tunnel to move a little. Best to do it once and do it right Link to comment Share on other sites More sharing options...
Bluudy Posted July 29, 2014 Author Share Posted July 29, 2014 Thanks very much for your info. I will start pursuing this option now Link to comment Share on other sites More sharing options...
Dan8 Posted July 29, 2014 Share Posted July 29, 2014 I am just in the process of changing to manual I just fitted the pedals and master and slave cylinder is all in place ready to swap boxes and fit fly wheel and clutch I have the prop there to and gearbox cradle I did not know that the tunnel needed swapping though is there a lot of persuasion required to get it to fit into the auto tunnel Link to comment Share on other sites More sharing options...
natony Posted July 29, 2014 Share Posted July 29, 2014 No it does not require a lot of persuasion, just get a good bit of wood and a hammer Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now