SupraLEDrears Posted July 14, 2014 Share Posted July 14, 2014 So I get this every now and again. Might be caused by the vibrations I'm suffering from. Is there a wire I can check? Link to comment Share on other sites More sharing options...
ScottC Posted July 14, 2014 Share Posted July 14, 2014 Possibly a dodgy brake light lamp. Have two of the rear brake lights been converted to fog lights? It could be a loose wire to the resistors which stops that warning light coming on after the conversion. Link to comment Share on other sites More sharing options...
SupraLEDrears Posted July 14, 2014 Author Share Posted July 14, 2014 Possibly a dodgy brake light lamp. Have two of the rear brake lights been converted to fog lights? It could be a loose wire to the resistors which stops that warning light coming on after the conversion. Only 1 and works fine. I'll have a look thanks. Link to comment Share on other sites More sharing options...
kitch79 Posted July 14, 2014 Share Posted July 14, 2014 I had a similar issue. Took the light cluster out, removed the lamps, and looked ok, put them back in and it worked. Couple of days later off again. On a closer inspection one lamps element had came away, sometimes making the circuit - sometimes not. Pulled it out, replaced it, fine now Link to comment Share on other sites More sharing options...
Chris Wilson Posted July 14, 2014 Share Posted July 14, 2014 You haven't fitted any LED bulbs have you? The warning system measures current draw, and LED's do not draw much current... Link to comment Share on other sites More sharing options...
snake Posted July 14, 2014 Share Posted July 14, 2014 I had a similar issue. Took the light cluster out, removed the lamps, and looked ok, put them back in and it worked. Couple of days later off again. On a closer inspection one lamps element had came away, sometimes making the circuit - sometimes not. Pulled it out, replaced it, fine now i had the same problem filiment was loose on one end inside the bulb Link to comment Share on other sites More sharing options...
SupraLEDrears Posted July 14, 2014 Author Share Posted July 14, 2014 You haven't fitted any LED bulbs have you? The warning system measures current draw, and LED's do not draw much current... The 4 501s are but been in for a year with the hids. I reckon it's shaken something loose with the vibrations I've been having. Link to comment Share on other sites More sharing options...
trebor69 Posted July 14, 2014 Share Posted July 14, 2014 Mine has been on permanently since I got the car but all lights work fine , must be the cheapo dodgy fog/brake light doodah. Link to comment Share on other sites More sharing options...
Style Posted July 15, 2014 Share Posted July 15, 2014 I had this on for ages and it turned out to be the PCB for the fog light that I have wired in was goosed. Visually it looks fine but for some reason it's given up Link to comment Share on other sites More sharing options...
Big Mark Posted July 15, 2014 Share Posted July 15, 2014 I had this on for ages and it turned out to be the PCB for the fog light that I have wired in was goosed. Visually it looks fine but for some reason it's given up I've had the same problem. I only spotted it when I reversed up again a window and notice that when I hit the brakes one light came on a little later than the others and over time it got worse until it stopped working. Turned out to be the foglight pcb. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now