Silece2k6 Posted July 2, 2014 Share Posted July 2, 2014 (edited) Hi Supra Drivers. My Name ist Patrick 25J from Germany/Herford I'm surfing a longe time in this Forum, looks the best of all? But now I will show you my Supra I just bought my Supra from Japan... took a while, but now shes still here It's a 95`Jspec TT 6Spd. Original Paint is 199 Silver but now its... I dont know She has a few Specs, but not that "AWESOME!" - Work 18" Alloys - HKS Intake (dont like HKS Filters) - Blitz BOV (maybe someone will trade?, i like hks ;D - Tein Super Street - Greddy Intercooler - Aftermarket Exhaust (realy quiet) - Koyorad Radiator - Viper Alarm System Stuff that I have already done: - New Tires (235/40 18) (265/35 18) - Installed Apexi RSM / Greddy Profec B (Not Set Up) - Defi Gauges installed - My old but good Momo Race Steeringwheel - Changed Oil and Transmission Fluid - Replaced Sparkplugs (two Coil Packs broke - Changed the Valve Cover Gasket and mad a startling discovery It was broken and I had to fix it, not th best, but still ok... When I criuse around, sometimes i will have code 42 speed Sensor. I think its because of the SLD? Had to check by days. So, i thinks thats all by now. At the end of '14 i will going Single, but I dont have any idea. 600HP sound enough for me Hope you like it :-) Regards Patrick Edited July 2, 2014 by Silece2k6 (see edit history) Quote Link to comment Share on other sites More sharing options...
hogmaw Posted July 2, 2014 Share Posted July 2, 2014 Cool car for cruising the autobahn Quote Link to comment Share on other sites More sharing options...
Dnk Posted July 2, 2014 Share Posted July 2, 2014 Welcome Patrick Many people over tighten the cam cover bolts so be careful, they should only be torqued up to 10 Nm approx. The gaskets go quite hard with age and instead of replacing them when they leak people tighten them up too much cracking the covers. Quote Link to comment Share on other sites More sharing options...
Silece2k6 Posted July 2, 2014 Author Share Posted July 2, 2014 Cool car for cruising the autobahn Not Tested yet Welcome Patrick Many people over tighten the cam cover bolts so be careful, they should only be torqued up to 10 Nm approx. The gaskets go quite hard with age and instead of replacing them when they leak people tighten them up too much cracking the covers. Yes i did that with 8NM, thanks Quote Link to comment Share on other sites More sharing options...
Nemesis Posted July 2, 2014 Share Posted July 2, 2014 Guten tag und willkommen in forum Patrick. Loving that colour, nice car. Quote Link to comment Share on other sites More sharing options...
Why T Posted July 2, 2014 Share Posted July 2, 2014 Welcome bud, I live in Hannover area and drive past or go to Hereford quite a bit, will have to say hello one day Quote Link to comment Share on other sites More sharing options...
Luxluc Posted July 2, 2014 Share Posted July 2, 2014 Willkommen Patrick, Nice Supra. Very special colour. Where are you located in Germany? For your single route, you have lots of interesting information on the forum. Cheers Luc Quote Link to comment Share on other sites More sharing options...
Silece2k6 Posted July 2, 2014 Author Share Posted July 2, 2014 Thx everyone. @Why T : Yes sounds cool. @Luxluc : 32278 Kirchlengern, its near Herford/Bielefeld. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.