LOGIE Posted May 25, 2014 Share Posted May 25, 2014 At first I had no wipers, indicators, and ABS light stayed on after my conversion. So I changed both of the dash looms and all the above is now working but I have no headlights now. High beem works when I pull back on the stalk but thats it. My headlights sidelights and tailights are now in op. Any advice? Whilst I sit in the car waiting for the thunder lightening and rain to stop. Quote Link to comment Share on other sites More sharing options...
wile e coyote Posted May 25, 2014 Share Posted May 25, 2014 Any pics of the lightning Quote Link to comment Share on other sites More sharing options...
LOGIE Posted May 25, 2014 Author Share Posted May 25, 2014 Hah no mate. Its the real proper stuff to. Thunder is booming big time. Quote Link to comment Share on other sites More sharing options...
David P Posted May 25, 2014 Share Posted May 25, 2014 Quote Link to comment Share on other sites More sharing options...
skippyboyo1 Posted May 25, 2014 Share Posted May 25, 2014 http://www.camxahoc.vn/wp-content/uploads/2012/06/faraday-cage200po.jpg That's science! Quote Link to comment Share on other sites More sharing options...
LOGIE Posted May 25, 2014 Author Share Posted May 25, 2014 Maybe if my supra gets struck my headlights will work briefly. Anyone got any genuine ideas Quote Link to comment Share on other sites More sharing options...
SPG Posted May 25, 2014 Share Posted May 25, 2014 Logie with regards to the bay loom, did this also get changed? Could there be any nicks in the wiring? When you flick your lights on, so the interior and dial lights illuminate? Quote Link to comment Share on other sites More sharing options...
David P Posted May 25, 2014 Share Posted May 25, 2014 That's a Faraday Cage, just like the one Logie is sitting in. I've been struck 3 times by lightening, so maybe my skin looks like that underneath? Quote Link to comment Share on other sites More sharing options...
David P Posted May 25, 2014 Share Posted May 25, 2014 Trace the circuits go to and from whence they should. Or you could always put the other loom back in and bridge those 3 wiper wires like I did. Quote Link to comment Share on other sites More sharing options...
LOGIE Posted May 25, 2014 Author Share Posted May 25, 2014 Cheers David but If I put the old loom back in I wont have wipers indicators and my ABS light will be on again. Quote Link to comment Share on other sites More sharing options...
LOGIE Posted May 25, 2014 Author Share Posted May 25, 2014 Yeah Sunny bay loom got changed also all my looms are from a TT now because I wanted stock elec fans. Im sure the bay loom is fine as my headlights worked prior to changing the dash and bulkhead looms Quote Link to comment Share on other sites More sharing options...
LOGIE Posted May 25, 2014 Author Share Posted May 25, 2014 Think I'll sell it. Pissing me off big time. Quote Link to comment Share on other sites More sharing options...
LOGIE Posted May 25, 2014 Author Share Posted May 25, 2014 Sorry sunny I never picked up on 2nd part of your post.. NO the interior lights dont illuminate mate. Quote Link to comment Share on other sites More sharing options...
LOGIE Posted July 5, 2014 Author Share Posted July 5, 2014 Finally got this fixed. Integration relay (large rectangular box) which is fixed onto the back of the drivers footwell fusebox. Small white plug connects to underside of that...I'd not connected it. It had been to a garage and they had not noticed it either. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.