Gabriella Posted April 28, 2014 Share Posted April 28, 2014 Dear Supra People, It was a nice sunny Saturday afternoon, so I took Supe for a little drive...all was going well when suddenly she decided to hit something in a result my JDL front bumper is - no more (cyclist is recovering ) This bumper as well as other one I had (DO-LUCK)was a bit too low anyway. What other not too low front bumpers options do I have ? G Link to comment Share on other sites More sharing options...
Scott Posted April 28, 2014 Share Posted April 28, 2014 Ridox is probably your best aftermarket bet. Link to comment Share on other sites More sharing options...
listy Posted April 28, 2014 Share Posted April 28, 2014 I always found my Top Secret one was very forgiving. The underside angles upwards towards the front so was pretty forgiving. Link to comment Share on other sites More sharing options...
Hassan Posted April 28, 2014 Share Posted April 28, 2014 Ive got the Ridox and would say its extremely good for our uk roads. It gives plenty off ground clearence. Link to comment Share on other sites More sharing options...
Gabriella Posted April 28, 2014 Author Share Posted April 28, 2014 Thank you guys. Any photos of Supra with Ridox front bumper so I can see how they sits on ? Link to comment Share on other sites More sharing options...
girth45 Posted April 28, 2014 Share Posted April 28, 2014 I thought you was selling your supra ? Link to comment Share on other sites More sharing options...
Hassan Posted April 28, 2014 Share Posted April 28, 2014 A few here but i will take some front shots off the car tomorrow for you. Link to comment Share on other sites More sharing options...
sideexitsupra Posted April 28, 2014 Share Posted April 28, 2014 A couple more Ridox here. Link to comment Share on other sites More sharing options...
Gabriella Posted April 28, 2014 Author Share Posted April 28, 2014 My Supra was lowered.. (JDL bumper in lowest point had 2 inches to the ground) Sideexitsupra/Hassan -Is your Supra lowered ? I thought you was selling your supra ? I changed my mind... Surprise Link to comment Share on other sites More sharing options...
sideexitsupra Posted April 28, 2014 Share Posted April 28, 2014 Top pic is on BC coil overs lowered to give about an inch between the tyre and the arch. Bottom pic is on Tein lowering springs. Sorry not sure how far it was dropped as it came with them on. Never had an issue with any speed bumps. Link to comment Share on other sites More sharing options...
Hassan Posted April 29, 2014 Share Posted April 29, 2014 Yes mine is on bc coilovers and lowered and still to get dropped even more. Link to comment Share on other sites More sharing options...
jim Posted April 29, 2014 Share Posted April 29, 2014 I wouldn't have said ridox is a high bumper altho it does curve upwards in the centre. My old one was lowered but not very low and it would have struggled over some of the bigger speed humps. It's the nicest aftermarket bumper imo Link to comment Share on other sites More sharing options...
Gaz6002 Posted April 29, 2014 Share Posted April 29, 2014 Stock with a plastic lip, and driving lessons. HTH Link to comment Share on other sites More sharing options...
Graham1984 Posted April 29, 2014 Share Posted April 29, 2014 Stock with a plastic lip, and driving lessons. HTH Link to comment Share on other sites More sharing options...
Gabriella Posted April 29, 2014 Author Share Posted April 29, 2014 Stock with a plastic lip, and driving lessons. HTH Sorry, I can't hear you I am in the kitchen Link to comment Share on other sites More sharing options...
Rummy Posted April 29, 2014 Share Posted April 29, 2014 Sorry, I can't hear you I am in the kitchen +1 Link to comment Share on other sites More sharing options...
Graham1984 Posted April 29, 2014 Share Posted April 29, 2014 Sorry, I can't hear you I am in the kitchen Hovis. Link to comment Share on other sites More sharing options...
clay Posted April 29, 2014 Share Posted April 29, 2014 If you wear in the kitchen. you wouldent of crashed your car. LOL Link to comment Share on other sites More sharing options...
Gaz6002 Posted April 29, 2014 Share Posted April 29, 2014 Sorry, I can't hear you I am in the kitchen Well good - I didn't say anything! Don't take my comment as sexist. I'd have said the same if a bloke had hit a cyclist too. Link to comment Share on other sites More sharing options...
Josh Posted April 30, 2014 Share Posted April 30, 2014 Well good - I didn't say anything! Don't take my comment as sexist. I'd have said the same if a bloke had hit a cyclist too. I'd have shaken his hand Link to comment Share on other sites More sharing options...
Shane Posted April 30, 2014 Share Posted April 30, 2014 Sorry, I can't hear you I am in the kitchen Excellent, you've found your place Sorry to hear that you have broken your car. I personally am starting to think that the stock rubber splitter is the way to go with the front. Though I have a stock bumper I have had a selection of fibreglass splitters and all have been a pain. The current one I have repaired about three times now and is just not forgiving, whereas the stock rubber one does provide a lot of flex. Link to comment Share on other sites More sharing options...
mellonman Posted April 30, 2014 Share Posted April 30, 2014 How about a stillen front bumper, its a complete urethane front bumper so is flexable like stock but with an after market look , if not then stock with polyurethane lip, On a side note JDL are made in poland you maybe able to get a great saving with your connections Link to comment Share on other sites More sharing options...
Gabriella Posted May 5, 2014 Author Share Posted May 5, 2014 If you wear in the kitchen. you wouldn't of crashed your car. LOL Clay you are such a hoot .. .. Sorry to hear that you have broken your car. I personally am starting to think that the stock rubber splitter is the way to go with the front. Though I have a stock bumper I have had a selection of fiberglass splitters and all have been a pain. The current one I have repaired about three times now and is just not forgiving, whereas the stock rubber one does provide a lot of flex. I don't want it to look odd with side skirts but might just go with this idea to save some time and money fitting anything aftermarket.. .. On a side note JDL are made in Poland you maybe able to get a great saving with your connections Hello, people of Poland ? Would you be mind........... never mind Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now