alex341 Posted April 18, 2014 Share Posted April 18, 2014 Anyone done this? My brake lights, indicators, reverse lights and even headlights work but not the tail lights. Im pretty sure the tail lamp failure sensor is the cause of this. Just curious to see if it works before i buy a new sensor. Link to comment Share on other sites More sharing options...
Swampy442 Posted April 18, 2014 Share Posted April 18, 2014 The sensor is just that, a sensor, its passive. It just monitors the resistance in the circuit, an increase puts the warning light on, it has no control whatsoever on the lights. Your problem lies elsewhere. Link to comment Share on other sites More sharing options...
Kev.O Posted April 22, 2014 Share Posted April 22, 2014 Is your lamp failure bulb lit? Could be a broken wire. From memory the number plate lights are fed before the control module so it'll be worth seeing if they work. If they do then the issue is at the back end of the car. Link to comment Share on other sites More sharing options...
Chris Wilson Posted April 23, 2014 Share Posted April 23, 2014 Using LED's with their lower current draw, instead of bulbs, can fool the sensor into thinking a bulb is inoperative. Link to comment Share on other sites More sharing options...
supradanturbo Posted July 25, 2023 Share Posted July 25, 2023 I know it’s been 9 years single the last reply. but I am having this exact same issue. mall lights working including numberplate light. Just no rear lights. No blown fuses etc. a few years ago I soldered a bridge on the board which solved this issue. now the bridge is still in place but no rear lights. Any help would be much appreciated Link to comment Share on other sites More sharing options...
Suprakeith Posted July 26, 2023 Share Posted July 26, 2023 11 hours ago, supradanturbo said: I know it’s been 9 years single the last reply. but I am having this exact same issue. mall lights working including numberplate light. Just no rear lights. No blown fuses etc. a few years ago I soldered a bridge on the board which solved this issue. now the bridge is still in place but no rear lights. Any help would be much appreciated I had this issue on mine few months ago, and it turned out to be fuse in fuse inside car on drivers side. fuse didn't look blown but replaced with new and tail lights were working on good again, may be worth to replace fuse just to be 100%. Link to comment Share on other sites More sharing options...
supradanturbo Posted July 26, 2023 Share Posted July 26, 2023 Was it the fuse up next to the accelerator pedals. Marked “tail” I’ve checked all the fuses with my metre to be sure Link to comment Share on other sites More sharing options...
Suprakeith Posted July 26, 2023 Share Posted July 26, 2023 12 hours ago, supradanturbo said: Was it the fuse up next to the accelerator pedals. Marked “tail” I’ve checked all the fuses with my metre to be sure Yes it was that fuse from memory, mine didn't look blown but just fitted new one and tail lights started working again, it was very strange Link to comment Share on other sites More sharing options...
supradanturbo Posted July 26, 2023 Share Posted July 26, 2023 Gonna stick a new one in just to rule it out. But I belled the fuse out. Next step is to try another lamp failure module Link to comment Share on other sites More sharing options...
supradanturbo Posted July 28, 2023 Share Posted July 28, 2023 New fuse tried. Still no luck. Gonna try a different lamp failure module over the weekend. Then need to work out how to link out the unit, if a working unit fixes the problem Link to comment Share on other sites More sharing options...
supradanturbo Posted July 29, 2023 Share Posted July 29, 2023 Got it figured out. Lamp failure box had burnt out in 2 place. The box is now linked out and working correctly. g/w - r/w g -l/g 2 Link to comment Share on other sites More sharing options...
Suprakeith Posted July 30, 2023 Share Posted July 30, 2023 10 hours ago, supradanturbo said: Got it figured out. Lamp failure box had burnt out in 2 place. The box is now linked out and working correctly. g/w - r/w g -l/g Sweet, so pleased you got to route of problem and its all fixed now Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now