flyby Posted April 12, 2014 Share Posted April 12, 2014 is it posible to remove stock twins (on UK), and get at GT35 insted, whitout chaging the ecu? Quote Link to comment Share on other sites More sharing options...
buster Posted April 12, 2014 Share Posted April 12, 2014 Simple answer is no! Quote Link to comment Share on other sites More sharing options...
flyby Posted April 12, 2014 Author Share Posted April 12, 2014 ok Quote Link to comment Share on other sites More sharing options...
Swampy442 Posted April 12, 2014 Share Posted April 12, 2014 Simple answer is yes, cheapskates and people in the states do it all the time. Is it advisable, no. I ran a T67 on a stock ECU for a while. As long as the stock boost cut is in place and you monitor the AFRs it should be safe, won't be much fun though Quote Link to comment Share on other sites More sharing options...
flyby Posted April 20, 2014 Author Share Posted April 20, 2014 I got HKS FCD, AEM failsafe A/F, boost controller. Quote Link to comment Share on other sites More sharing options...
bignum Posted April 20, 2014 Share Posted April 20, 2014 I ran my uk on the phr 67 for a few months at low boost, ie below 1 bar and it was fine. Quote Link to comment Share on other sites More sharing options...
flyby Posted May 8, 2014 Author Share Posted May 8, 2014 will it get any extra HP if running 1 bar VS. BPU++? Quote Link to comment Share on other sites More sharing options...
Krimi Posted May 8, 2014 Share Posted May 8, 2014 Yes you can!! But you need to put your maf into the stock intake pipe, but yes, be carefull with the boost settings and your stock fuel system Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.