shetlandsupra Posted April 10, 2014 Share Posted April 10, 2014 What size of fuel lines should I use -8an from pump then split to -6 but what's that in mm? Quote Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted April 10, 2014 Share Posted April 10, 2014 What sort of power are you going to be running? Quote Link to comment Share on other sites More sharing options...
shetlandsupra Posted April 10, 2014 Author Share Posted April 10, 2014 Hoping around 700 Quote Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted April 10, 2014 Share Posted April 10, 2014 Well -6 is roughly 7mm and -8 is 13mm, not quite sure what you mean by splitting after the pump? Quote Link to comment Share on other sites More sharing options...
shetlandsupra Posted April 10, 2014 Author Share Posted April 10, 2014 To feed both ends of the rail run it bigger first then split to 2 lines Quote Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted April 10, 2014 Share Posted April 10, 2014 Ahh right! I would think as long as the pump can maintain pressure at that size it should be fine, a lot of people run twin pumps with -6 so cant see a problem. I ran 550BHP on std lines. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.