Tommyd16 Posted April 2, 2014 Share Posted April 2, 2014 My misses just txt me saying her dad kicking off because the supra has left oil patches on the block paving lol just went out to have a look and sure enough seems to be a slight leak. Seems to around the passenger (left side) engine mount area. Any ideas before I get it jacked up tomorow - weather dependant Link to comment Share on other sites More sharing options...
reeceu Posted April 2, 2014 Share Posted April 2, 2014 thats near where your oil filter is so that would be my first check, make sure its secure and tight! Link to comment Share on other sites More sharing options...
Dnk Posted April 2, 2014 Share Posted April 2, 2014 My guess is engine oil Link to comment Share on other sites More sharing options...
Tommyd16 Posted April 2, 2014 Author Share Posted April 2, 2014 Is the engine oil level sensor round there aswell? Link to comment Share on other sites More sharing options...
Tommyd16 Posted April 2, 2014 Author Share Posted April 2, 2014 Just went and had another look. Seems to be forward of the engine mount, behind the ps pump on the block. That what seems to be the most moist. The oil filter is ok Link to comment Share on other sites More sharing options...
TT Paul Posted April 2, 2014 Share Posted April 2, 2014 jack it up see if you can find it, clean it, run it trace the leak you'll be there all day if not.. Link to comment Share on other sites More sharing options...
SPG Posted April 2, 2014 Share Posted April 2, 2014 Is the fluid red in colour? Link to comment Share on other sites More sharing options...
TT Paul Posted April 2, 2014 Share Posted April 2, 2014 Is the fluid red in colour? red PAS fluid, Link to comment Share on other sites More sharing options...
Tommyd16 Posted April 2, 2014 Author Share Posted April 2, 2014 Hard to tell the colour on the block as it so dirty and too dark to see on the ground. I'll get it on jacks tomorow if I can Link to comment Share on other sites More sharing options...
Scooter Posted April 2, 2014 Share Posted April 2, 2014 That area is where the oil pressure sensor is, be careful as it can get worse and it will leak noticebly when running. fairly easy to replace once you have removed the aircon pump out of the way. Link to comment Share on other sites More sharing options...
Tommyd16 Posted April 2, 2014 Author Share Posted April 2, 2014 So possibly the seal on the oil pressure switch had gone? Link to comment Share on other sites More sharing options...
Scooter Posted April 2, 2014 Share Posted April 2, 2014 The plastic part of the switch itself fails, but I think the sensor is quite cheap £10-15? It's jut tricky to get to... Link to comment Share on other sites More sharing options...
Scooter Posted April 3, 2014 Share Posted April 3, 2014 (edited) Some good info here... http://www.mkivsupra.net/vbb/showthread.php?18480-Oil-Pressure-Switch&highlight=Pressure+switch Edited April 3, 2014 by Scooter (see edit history) Link to comment Share on other sites More sharing options...
Tommyd16 Posted April 3, 2014 Author Share Posted April 3, 2014 Cheers I'll look in the morning Link to comment Share on other sites More sharing options...
Tommyd16 Posted April 3, 2014 Author Share Posted April 3, 2014 It's coming from the oil filter housing from the top somewhere. Is there two Allen big all bolts blanking something off I've just read? Could it be leaking from there? Link to comment Share on other sites More sharing options...
trebor69 Posted April 3, 2014 Share Posted April 3, 2014 They are there for an oil cooler (feed and return pipes), mine too was leaking from the oil filter housing to block .....there is an O ring in there like with the oil filter that can perish ....I also took those Allen bolts out and put some threadlock on them just to be sure....all is fine now. Link to comment Share on other sites More sharing options...
Tommyd16 Posted April 3, 2014 Author Share Posted April 3, 2014 I couldn't get to them to take them out so I just got some instant gasket all over the top. Think its ok now Link to comment Share on other sites More sharing options...
TT Paul Posted April 3, 2014 Share Posted April 3, 2014 just check your level to be sure Link to comment Share on other sites More sharing options...
Tommyd16 Posted April 3, 2014 Author Share Posted April 3, 2014 Yh I will once its back on the deck. Been sorting other issues out aswell while I was under there Link to comment Share on other sites More sharing options...
Tommyd16 Posted April 10, 2014 Author Share Posted April 10, 2014 Still have abit of a leak from the Allen nuts. Is there anyway to get to them with out removing the inlet mani? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now